Cleaning The Feed Module - Kodak PS50 Series User Manual

Cleaning the feed module

5-4
• When removing or cleaning the feed module, it may be easier to
access the feed module if you remove the input tray. To remove the
input tray, gently push the input tray to the left or right to release the
pin from the slot, and lift it out of position.
1. Pull against the raised edge of the feed module cover and lift it up
and out of position.
NOTE: Be careful not to damage the paper present sensor when
removing or cleaning around the feed module.
2. Rotate the feed module forward and push it to the left to lift it out of
position.
3. Manually rotate and wipe the feed module tires with a roller cleaning
pad.
4. Inspect the feed module.
If the feed module tires show signs of wear or damage, replace the
tires or the feed module. See the "Replacement procedures" for
more information.
A-61760 September 2012