3-4
Image Cleaner Tool — when checked, the Picture Saver System will
make every attempt to eliminate any streaks in the image during the
scanning process. Applying the Image Cleaner Tool does not slow
down the scanning process. Frequently streaks in images are caused
because the scanner has accumulated dust and dirt. Be sure your
scanner is clean to help prevent streaks in images.
NOTE: The Image Cleaner Tool is not applied to flatbed scans and front
side scans.
Settings — when selected, the Scan Settings screen is displayed
which allows you to change the following settings: the batch scan
mode, sharpen images, resolution and other settings. For more
information regarding these settings see the section entitled, "Scan
Settings screen".
This Batch
• Image: displays the number of the first image shown in the 16-Up
Display window.
• To: displays the number of the last image shown in the 16-Up Display
window.
• Of: displays the total number of images scanned in this batch.
Total Images — displays the total number of images in the order.
A-61760 September 2012