Application Configuration - Kodak PS50 Series User Manual

Application
configuration
7-4
The Picture Saver Scanning System may be configured by modifying
the PrintScan.ini file in the directory specified below for your particular
Windows operating system. You can change the location for the output
JPG files (Target_Path) and adjust the folder size for burning CDs,
Kodak Picture CDs or DVDs. The maximum folder size can be changed
by specifying a new value for the CDFolderSize, PCDFolderSize and
DVDFolderSize parameters in the PrintScan.ini file.
A3 and Legal Flatbed scanner rotation may be set using the
FlatbedRotation parameter.
Reversing the order of the photo faceup scans may be enabled/
disabled using the ReverseFaceUp parameter.
The Scan Viewer may be enabled/disabled using the ShowViewer
parameter. The Scan Viewer refresh rate may be slowed down using
the ViewerDelay parameter. This will cause each image to remain
displayed on the screen longer, therefore not all of the images scanned
are displayed.
The default values for other parameters are preset to optimal values or
set by the Scan Settings screen and generally do not need to be
modified.
Additional guidance for changing specific parameters may be found in
the PrintScan.ini file.
PrintScan.ini folder location
Windows XP:
C:\Documents and Settings\All Users\Application
Data\kds_kodak\Picture Saver System PS50
Windows Vista, Windows 7 and Windows 8:
C:\ProgramData\kds_kodak\Picture Saver System PS50
NOTE: These folders may be hidden. If so, you may need to go into the
Windows operating system to display them.
A-61760 September 2012