Kodak PS50 Series User Manual page 12

2 Installation
Contents
Installing the scanner
A-61760 September 2012
Installing the scanner ...................................................................... 2-1
Installation notes ......................................................................... 2-2
Installing the Kodak Picture Saver System Software.................. 2-2
Connecting the power cord and USB cable ................................ 2-4
Turning on the scanner ................................................................... 2-5
Turning the scanner off with the toggle power switch ..................... 2-6
Turning the scanner off with the rocker power switch ..................... 2-6
Starting the application software ..................................................... 2-6
Exiting the application software ...................................................... 2-6
This section provides detailed information of the Installation Guide that
is provided with your scanner. Follow these steps in the order they are
provided to install your scanner. For additional information about
installation and use of the system, go to www.kodak.com/go/
picturescanning, and select the Kodak Picture Saver Scanning
System PS50. Select Video Resources on the Support tab.
NOTE: If you have already performed all of the steps in the Installation
Guide, skip this section.
• Power down any scanners attached to the PC before installing the
Picture Saver System Software application.
• Install the software before connecting the scanner to the PC.
• Be sure you have administrator rights. The Picture Saver Scanning
System application must be installed under Administrator and run
under Administrator or Standard groups.
• Close any currently running applications.
• Close any currently running applications that use a USB software
dongle before starting the Picture Saver Scanning System
installation.
• Close any scanning applications including the Scan Validation Tool
and Smart Touch.
• Remove any USB software dongle connected to the PC.
• An Internet connection is necessary to complete Product
Registration.
NOTE: If an Internet connection is not available, contact Kodak
Support (refer to Chapter 7, "Contact Information").
2-1