6
Manually rotate and wipe the separator module rollers with a roller
cleaning pad.
7
Inspect the rollers. If the separator roller tires show signs of
wear or damage, replace the tires or the separator module.
8
Insert the separator module and align the shaft ends.
9
Press until the separator module clicks into place.
10
Go to the next section to clean the feed module.
Cleaning the Feed Module
1
Push against the raised edge on the left side of the front roller cover to
the side and pull the cover up and out to remove it.
4
Versitec 1- 888 - 722 - 6548
Front Roller
Cover
www. versitec.com