Installation notes
Installing the Kodak Picture
Saver System Software
2-2
Windows 7 and 8
If you are installing on Windows 7 or Windows 8, the following message
may be displayed after installing the software and turning on the
scanner.
• Click on the Skip obtaining driver software from Windows Update
link.
Installing and/or upgrading the Kodak All In One Home Center Software
on the same PC with the Kodak Picture Saver System Application may
remove the PS50 registry entries. This will prevent the Kodak Picture
Saver System Application software from running. The product
registration screens may be displayed instead of the application splash
screen. If this happens, re-install and re-register your Kodak Picture
Saver Application.
1. Insert the Kodak Picture Saver System Software Installation CD in
the CD-ROM drive. The installation program starts automatically.
NOTE: If the installation does not auto start, access the drive
where the CD is inserted and browse to the
INSTALLSTW.exe file on the root directory of the CD.
2. Select Install Language.
3. Click Next when the Welcome screen is displayed.
4. Click Next after you have read and agreed with the terms of the
Software License Agreement.
5. If you want to store the scanned images in the c:\Scanned_Pictures
default directory, click OK. Otherwise, use the Browse panel to
select the desired directory, or type the full pathname of the
directory. When finished, click OK.
A-61760 September 2012