Remote Control; Upgrade Firmware; Save/Reload Settings - EnGenius OA7535 User Manual

8.4 Remote Control

Host Address
Port
Enable
Apply/Reset

8.5 Upgrade Firmware

Click on the Upgrade Firmware link under the Management menu. This page is used to upgrade the
firmware of the device. Make sure that downloaded the appropriate firmware from your vendor.
Auction: Upgrade process may take few minutes, please do not power off the device and it may cause
the device crashed or unusable. EOA7535 will restart automatically once the upgrade is completed.

8.6 Save/Reload Settings

Click on the Save/Reload Setting link under the Management menu. This option is used to save the
current settings of the device in a file to your local disk or load settings to the device from your local
disk. This feature is very handy for administrators who have several devices that need to be
configured with the same settings.
Specify the IP Address you would like to use as your remote controller.
Specify the Port number.
Place a Check to enable Remote management.
Press Apply to save the changes or Reset to return previous settings.
39