Management; Administration; Management Vlan - EnGenius EAP350 User Manual

8 Management

8.1 Administration

This page allows you to change the EAP350 username
and password. By default, the user name is admin and
the password is: admin. Password can contain 0 to 12
alphanumeric characters and is case sensitive.
new
New Name: Enter a username for logging in to the Web
Configuration.
New Password: Enter a new password for logging in to the
Web Configuration.
Confirm Password: Re-enter
confirmation
.
Save/Apply / Cancel: Click Save/Apply to
or Cancel to return previous settings.
logout
Logout: Click Logout to
the new password for
apply
the changes

8.2 Management VLAN

This page allows you to assign a VLAN tag to the packets.
A VLAN is a group of computers on a network whose
software has been configured so that they behave as if
they were on a separate Local Area Network (LAN).
Computers on VLAN do not have to be physically located
next to one another on the LAN.
Management VLAN ID: If your network includes VLANs and if
tagged packets need to pass through the Access Point, enter
the VLAN ID. Otherwise, click No VLAN tag.
Accept / Cancel: Click Accept to confirm the changes or
Cancel to cancel and return previous settings.
Note:
1. If you reconfigure the Management VLAN ID, you may lose your
connection to the EAP350. Verify that the DHCP server supports the
reconfigured VLAN ID and then reconnect to the EAP350 using the
new IP address.
2. Clicking Accept does not apply the changes. To apply them, use
Status > Save/Load (see section 5.1).
35