Setting Date And Time - Hitachi DZ-MV780A Instruction Manual

SETTING DATE AND TIME
Set the current date and time so that the date and time you make a recording can be recorded
correctly
The following procedure can also be used to correct the date and time you have already set.
Use _ / _ / ,1_ / _ buttons
to select, and then press I,/11 to
designate.
1 Turn the DVD video camera/recorder on.
2 Press the MENU button.
The menn screen will
appear.
Use tile I_1_/I,'I,!/'_II/
buttons to choose
"Date Setup" and then
"Date Set".
4
Press the _ hntton.
T}_ Oi_ Z_oz
401
ii_ MiC Fii{er 0_f
I _ENTERi_;RETJRN
c_MI
(,}-NTER(_)RETIJRN
ORAM I
The fignre fbr the
month will be selected.
IThe digit that is
highlighted first I{_'J£N ER 'm)RETIJRN ®R}M I
depends on tile date
display %rmat (set up in Date Mode): The
digit on the ]eft end of tile date display will
he first highlighted.I
Note:
After setting the figure for the month, press the
button to right to select the digit to be set. tf you
press the I_/11 button after selecting the figure for
the month, the screen for verifying the set date wilt
appear instead of screen for setting day, year or
time.
5 Press tile _ o1"_
I
button to select the digit
I
yon want to set in
I
seqnence.
Press tile _ o1"Dd_l _,_rER @ _ETURt _>MI
button to select the
numher %r current date/time, and then
repeat step 5 to set tile current date and time.
Note:
To stop date/time setting midway, press the •
button
6
After setting tile cnrrent
I
date and time, press tile
I
,,_,i, _,
I_/11 bntton, d/0_t_g/a°*2_OS_e upt_°°_
The screen %r verifying
the set date wi appear.
7 If the displayed date and time are correcL use
press the _ button to choose "YES", and
then press tile I"/11 button.
The date and time will be set, and the DVD
video camera/recorder will enter tile
recording pause status.
Choosing "NO" will restore tile menu screen.
Note:
This DVD video camera/recorder incorporates a
rechargeabIe battery to store the date and time in
memory. If this buitt-in battery is exhausted, the date
and time will be reset To prevent this, connect the AC
adapter/charger to DVD video camera/recorder every 3
months, and leave them for at least 24 hours with the
DVD video camera/recorder turned off: The built-in
battery will be charged
I
37