Hitachi DZ-MV780A Instruction Manual page 147

Creating DVD Video from DVD-RAM Disc
Recorded on DVD Video Camera/Recorder
Using DVD-MovieAIbumSE and DVDfunSTUDIO, you can create a DVD video (DVD-R disc) from the
images recorded on this DVD video camera/recorder, following the procedure below.
A
/ Insert a recorded DVD RAM disc into the
DVD video camera/recorder, and connect tile
DVD video camera/recorder to the USB
terminal of PC.
/- Start DVD MovieAlhumSE. and edit the
images
on DVD RAM disc as necessary.
3
Right click the tlmmbnail from which you
wish to create a DVD video on the DVD
MovieAlbumSE screen, and execute "Export".
4 The "Program Export" screen as shown
below will appear: Perfbrm settings for
export.
For settings on "Resolution '_and "Audio" in
the "Export Mode" box, choose the options
with "Recommendations" displayed. If you
change the fblder name in "Destination
Folder _'cohmm, you can also change the
folder in which the exported file will be
stored.
Note:
• Choose "Divide by Chapter" in the 'Option" box:
Each scene of program recorded on the DVD
video camera/recorderwilt be saved as an
independent movie file so that export can be
executed at high speed. If you do not choose
"Divide by Chapter", movie files may be unified
and re-encoded, so it may take time to export
them. DVD-MovieAIbumSEmay automatically re-
encode a movie recorded in the XTRA mode
containing rapidly moving scenes, regardless of
the 'Divide by Chapter"setting, and it may take
some time to export the movie file.
• Any disc on which scenes were combined (see
page 113) on Disc Navigation of this DVD video
camera/recorder is re-encoded,so it may take time
to export files
• Re-encoding may cause image degradation
• Do not choose "Simple Export" inthe 'Export
Mode" setting box: Choosing it may stop export
midway.
5 Click the Start hutton to start export.
6 When export is complete, message "The file
exporting was completed successfldly.
Do you wish to create a 'DVD Video' disc"
will appem: Check the small box for "Eject the
disc being used", and then click "Yes".
7 The cover of disc insertion block will open:
Remove the DVD RAM disc, insert a brand
new DVD R disc, and then close the cover of
disc insertion block.
DVD MovieAlhumSE will automatically end,
and the 'Export to Disc" screen will appear:
Click the "Start" button.
"Program Export" Screen Click
147