Table of Contents
Advertisement
When
the DVD video
camera/recorder
is connected
to PC:
No drive icon appears
The DVD video camera/recorder is not turned on.
44
on PC.
Check the power supply.
Turn PC off and then disconnect the PC connection cable. Turn
PC on again, and then use the PC connection cable to connect
the DVD video camera/recorder to PC.
Make sure the PC connection cable is completely plugged into
this DVD video camera/recorder.
Error occurs in playback
If error occurs with USB connection, the transfer rate is not
of DVD video camera/
sufficient. It is recommended that you use a USB terminal
I41
recorder on PC.
conforming to USB2.0 when connecting the DVD video camera/
recorder.
Application is not
Turn the PC and DVD video camera/recorder off, and try again.
normatty run on PC.
Error occurs during
The temperature of DVD video camera/recorder is too high due
writing to disc.
to continuous operation.
Disconnect the DVD video camera/recorder from PC once,
remove the disc from the DVD video camera/recorder, and then
turn it off. After a few moments, connect them again and write to
a brand-new disc.
Transfer of images
Connect the DVD video camera/recorder to another USB terminal
stops,
of PC. If your PC is a desktop type, it is recommended that you
use USB terminal on the back of PC. If you are using USB2.O
extended card, it is also recommended that you install the newest
version driver provided by each USB2.O card maker.
DVD-RAM/R drive built
This problem may be solved if the software related to DVD-RAM/
into PC cannot be used
R/RW of your PC is upgraded, or if the UDF driver is uninstalled.
after the provided
However, with Windows ® Me / 2000 Professional, uninstatling the
software has been
UDF driver will make it impossible for the JPEG stills recorded on
installed.
DVD-RAM of this DVD video camera/recorder to be read by the
PC.
DVD-R disc cannot be
DVD-MovieAtbumSE does not support playback or data read on
played back on DVD-
DVD-R disc: Use generally available DVD video playback
I43
MovieAlbumSE.
software to play back DVD-R disc on PC.
Error appears when
Make sure that your PC display adapter (video card) conforms to
starting DVD-
DirectX8.1.
I41
MovieAlbumSE.
Video written to hard
DVD-MovieAtbumSE cannot edit DVD-VR data stored on hard
disk of PC cannot be
disk of PC: Copy the data to another DVD-RAM disc and then
edited on DVD-
edit it.
MovieAlbum copy tool.
Movies are not
Make sure the power switch of this DVD video camera/recorder is
recognized by
set to "411" or "1_1".
application in PC.
II
111
Hide quick links:
Advertisement
Table of Contents
