Table of Contents
Advertisement
Changing
Setting
of Demonstration
This DVD video camera/recorder
is equipped with a demonstration
function
The default at pumhase time is "Auto'; which will automatically
start the demonstration
approx
three
minutes after the DVD video camera/recorder
is turned on
Use the following procedure if you wish to view the demonstration
immediately
or change the setting
to "Off't
1
2
3
Press the MENU button.
Choose "Initial Setup",
"Demo Mode", and
then press tlle I_/||
button.
Press the I_1 or
button
to choose tile
desired
option,
and then press the I_/1|
button.
Auto:
To start demonstration approx. 3
minutes after turning the DVD video
can-lera/recorder
oil.
Off
To set demonstration to off
Start:
To start demonstration immediately.
Press the MENU button again: The menu
screen will disappear:
To stop tile demonstration midway, press tile
• button.
The demo mode will end when tile DVD
video camera/recorder
is turned off or the
DISC EJECT hutton is pressed down.
Note:
• You can press the DISC NAVIGATION
button to stop
demonstration
midway: The Disc Navigation
screen
wilI appear
• If you choose "Auto", the demonstration
wilt not start if
a disc is loaded with the power switch set to "4m'_or
"1_1",or a card is loaded with the power switch set to
• The demonstration
function witl not work when the
DVD video camera/recorder
is connected
to PC (for
DZ-GX20A or DZ-MV780A
only)
• While the demonstration
is being given, the recording
indicator will blink
HITACHI
154
Hide quick links:
Advertisement
Table of Contents
