Date/Time Setting; Self Timer - Hitachi VM-SP1A Instruction Manual

8mm video camera/recorder
Table of Contents

Advertisement

iBEBYiFiBAYiBN
ANBOPERAYi6B OFBSBYR6[B
13. Diopter Control
To use the electronic
vie_inder
without eyeglasses
on, turn this for your optimum
focus
adjustment.
14. "BACK LIGHT" Button
When the subject is lit from behind, press and hold this button to compensate
for the
back-lighting.
15. "START/STOP"
Button
This button operates
only when the case is closed tightly. When you use the
camera/recorder
with the case open, operate the "START/STOP"
button inside the case
or on the remote control.
This button is used to control the camera/recorder.
When operate control is set to
"CAMERA"
position,
pressing this button starts the tape to begin recording.
"REC"
appears
in the viewfinder.
When this button is pressed again, "PAUSE"
appears
instead of "REC" and the tape
stops and the camera/recorder
enters the record/pause
(stand-by)
mode.
16. Power Zoom Switch
This switch operates
only when the case is closed tightly. When you use the
camera/recorder
with the case open, operate the power zoom switch inside the case or
on the remote control.
This switch performs
zooming
electrically.
"W": Picture becomes wider gradually.
"T": Picture becomes
telescopic
gradually.
17. Hand Strap
Adjust to best fit your hand.
18. Camera/Recorder
Control Buttons
These shaded
buttons on the remote control function
the same as those on the
camera/recorder.
19. "REC" Buttons
Press these buttons at the same time to record pictures from an external input
connected
to the "AV IN/OUT"
jack. These buttons can be used as record buttons only
when the camera/recorder
is set to the VCR mode.
20. "SELF TIMER"
Button
This button is used when performing
self-timer
recording.
See page 29.
21. "REVIEW"
Button
Used to review the last few seconds
of the recorded
segment
in the record/pause
mode.
22. "AV DUB" Button
This button is used to record new audio and video in place of existing audio and video.
See page 36.
23. "PAUSE"
Button
When this button is pressed in the playback
mode, the tape stops and you can view a
still picture. When this button is pressed again, the tape runs to resume
playback.
24. "AV IN/OUT"
Jack
Use the RF output adapter (provided)
or the AV output cord (provided)
to connect
this
jack to a TV to view the pictures played back by the camera/recorder.
Use the AV input cord (provided)
to connect this jack to a TV or VCR to record pictures
from the VCR or TV.
Case Open Illustration
25. "DATE/TIME"
Set Buttons

Advertisement

Table of Contents
loading

Table of Contents