Hitachi DZ-MV780A Instruction Manual page 61

JUMPING TO SPECIFIED POINT (GO TO)
1 Press the MENU button
during playback.
2 Choose the option
(point you want to go
to), and then press tile
li_/|| button.
Top:
To go to tile start, and enter playback pause.
End:
To go to the end of last scene, and enter
playback pause.
Specif,/:
To go to a specified point and enter playback
pause. See tbe flollowing for details.
OSpecifying the point to view
10hoose .1step 2, bove,then
press tbe I,,III button.
The screen fbr specif_¢ing the point to go to
will appear.
Position of currently Total recording time of
scenes
3
Press the !'/ll button to enter the selection.
The DVD video camera/recorder will go to
the specified point and enter the playback
pause stattls.
Pressing !"/ll again will start playback.
To cancel the "Go To" procedure midway, press
the • button before going to the specified point.
2
Use the i'_l_/i'i,I/_'ql/li_l_ bnttons to select
the desired time of chosen point.
Press _ : To select the start.
Press Dd_l : To select the end.
Press _l or _ :
• Press once:
To move the cursor in 10 second units
(1 still units fkor card)
• HoM down:
To move the cursor in 1 minute units
(10 still units fbr card)
Note:
• If multiple scenes are selected using the Disc
Navigation function or SELECT button, choosing
"Top" will jump to the beginning of selected scenes
(p 131)
• When multiple scenes are selected, the total time of
selected scenes will appear in the "total recording
time" display.
• With card, the number of stills wilt appear at the
"TOP '_, "CURRENT", "END" and "GO TO" indicators
• The cursor may not move at same-pitch intervals
/
(When the start of scene is selected)
-_ Cursor at current image position
w Cursor at (GO TO) position
61