Table of Contents
Advertisement
Chapter 2
Set-up _ _ _ _ _ _ _ _ _ _ _
■
Setting the Date and Time
The recorded video/audio data management will be performed with the date and
time you set when you started to record.
Use the following procedure to set the MP-EGlA's internal clock to the current
date and time correctly:
* You can also use the remote control to set the date and time.
0
Set the CAM/OFF/PLAY switch to CAM.
Hold the red button at the center of switch, and then set the switch to CAM.
* When the switch is set to PLAY, the LCD and INITIALIZE CARD parameters will not appear.
* When the AV cable is connected, the PICTURE ADJ parameter will not appear
e
Press the MENU button.
The SET UP menu will appear on the LCD monitor.
The INITIAL parameter will be displayed in green.
*The menu does not appear during recording.
e
Display the INITIAL SET screen.
Press the ► (PLAY) button.
The INITIAL SET screen will appear.
SET UP
► INITIAL
DISPLAY
LCD
PICTURE ADJ
ON
ON
TA SEL
► ENTER
IMENUI EXIT
Initial Setting Screen
INITIAL SET
►
REC SET UP
DATE
ENERGY SAVE ON
INITIALIZE CARD
T.ASEL
► ENTER
IMENUI EXIT
Advertisement
Table of Contents
