Inserting Battery Into; Removing Battery From - Hitachi DZ-MV780A Instruction Manual

INSERTING BATTERY INTO REMOTE CONTROL
Insert the provided lithium battery into remote controh
,4
/ While inserting a fine rod into tile bole
marked PUSH, pull tile battery holder out
fiJrward.
2
Insert tile lithium battery with tile positive (_)
terminal f_cing down.
3
Slide tbe cox,er to close it.
Note:
The life of lithium battery is approximately one year If
the battery is discharged, no operation is possible with
remote control: Replace the battery
Battery holder
REMOVING BATTERY FROM REMOTE CONTROL
I Whi,e pnshing
tile battery holder, slide tile
battery out.
Warning:
• KEEP THE BATTERY AWAY FROM CHILDREN AND
PETS.
• IF SWALLOWED CONSULT A PHYSICIAN
IMMEDIATELY FOR EMERGENCY TREATMENT
• BATTERY MAY EXPLODE IF NOT HANDLED
PROPERLY. DO NOT RECHARGE, DISASSEMBLE
OR DISPOSE OF IN FIRE
Note:
• Replace the battery with a Hitachi Maxell, Sony,
Panasonic, Sanyo, Toshiba CR2032, or Duracell
DL2032. Use of another battery may present a risk of
fire or explosion
• Dispose of battery safely in accordance with IocaI
laws Do not dispose of in fire.
• Do not short circuit the battery.
• Do not hold the battery with the metallic tweezers.
• Keep the battery in a dark, cool, dry place
• The remote control (DZ-RM4W) and lithium battery
(CR2032) are supplied only with the DZ-GX2OA and
DZ-MV78OA
33