Hitachi DZ-MV780A Instruction Manual page 45

Inserting and Removing Disc
INSERTING DISC
A
/ Press down tile DISC EJECT bntton once and
release it.
A few moments after the ACCESS/PC
indicator blinks, the cover of disc insertion
block will open.
2 Gently open tile cover by hand f\dly nntil it
stops.
3 Push the disc against the turntable at the
center to lock it until a click is heard.
TurntabIe
_ _ Push the shaded
portion
• Note that the recording surface of disc must face
the inside of DVD video camera/recorder
• Never touch the disc recording surface or pickup
tens
A
_1' Push the section marked "PUSH CLOSE" on
the cover of disc insertion block, to close the
covetL
Then the DVD video camera/recorder will
automatically recognize the disc: While the
ACCESS/PC indicator is lit, do not cut off the
power supply, and do not subject the DVD
video camera/recorder to any vibrations or
impact.
• Identifying recording sides of
disc:
Single sided disc:
The recording side is
opposite to the printed labeh
Double-sided disc:
The recording side of "SIDE
A" is opposite to the "SIDE
A" marked side.
The recording side of "SIDE
B" is the "SIDE A" marked
side.
"SIDE A" mark
The opposite side is
the "SIDE A"
recording side.
: iilJ _t
:_ _- Pickup lens
• Use the disc cleaning cIoth provided to wipe off
any dirt adhering to the disc recordingsurface.
• Do notuse a dirtiedor scratched disc.
• The recording side must face the inside (DVD
video camera/recorder).
45