Hitachi DZ-MV780A Instruction Manual page 55

ODisplay when recording an image of yourself
Wben recording with tile LCD screen f_cing tile same direction as tile
lens, tile operating status will appear: The battery remaining level will
appear only when the remaining level is very low, and tile display will
blink.
Tile fiallowing operating status indicator will light or blink to give
warning message to usei: The message can be checked when returning
the LCD monitor 180o to the original status fi'om the status in which tile
LCD screen was R_cing the same direction as tile lens.
No warning/message (see page 52) will appear when recording with the LCD screen ti_cing tile same
direction as tile lens.
Instead, the tbllowing screen display symbols will blink to int5rm you of tile operation status of
DVD video camera/recordet_
When the LCD monitor is turned 180° from tile position with tile LCD screen tilcing tile same
direction as tile lens, the warning/message can be cbecked.
elnterpreting symbols on LCD screen when recording with the screen
facing the same direction as the lens:
m
o
HO
• A write-protected disc is loaded.
• A locked card is loaded.
• An unusable card is loaded.
• An attempt to record a still is being made with a DVD-R disc
used.
• An unusable disc is loaded.
• During recording (lights in red).
• The remaining capacity on disc is approaching the limit 0 (blinks
in red).
• During recording pause (lights in green).
• During focus lock (lights in purple).
• The remaining capacity on disc or card is approaching the limit 0
(blinks in red).
• There is no remaining capacity on disc or card (blinks in green).
• An attempt to record a copy-guarded image is being made
(blinks in green).
Operating status/
_ warning message
_Battery remaining
level
Note:
• If the LCD screen is set facing the same direction as the lens, the LCD screen will display a mirror image (left and
right reversed) H
• If the LCD screen is set facing the same direction as the lens, you can also view subject image in the viewflnder.
• Although you can switch to the manual focus, exposure and on-screen display modes even during recording with
LCD screen facing the same direction as lens, they will not appear on the screen
• When the LCD monitor is opened and turned 180 o with the Program AE set to Low Light, the monitor screen will
light white (see page 87)
55