Table of Contents
Advertisement
RIPV1&V2 will give the router the ability to make routing
information exchanges with any adjacent router.
Routing Mode – This parameter allows the router to specify the
extent to which it partakes in the RIP on this port. The options are
described below:
1. None – The router will not participate in any RIP exchange with
2. Listen – The router will incorporate routing information from
3. Talk – The router will send adjacent routers its own routing
4. Both – The router will incorporate routing information from
IP Multicasting – This feature enables or disables the router's
ability to route IP Multicast packets from one interface to another
(for example, from the LAN ports to the ISDN port). IP
Multicasting is a bandwidth-saving method for transmitting data to
more than one host. IP Multicasting is often used when
sending/receiving audio or video data. When IP Multicasting is
enabled, the router will search its multicast forwarding table and
depending on the result of the search will either forward the packet
or add the group to the table. If IP Multicasting is disabled, all
multicast packets received by the router will be dropped, effectively
limiting multicasting to the LAN. The router can also perform
DVMRP if this feature is enabled (see Multicast Protocol below),
which allows the DI-206 to share multicast information with other
routers, enabling IP multicasting over the ISDN port.
Configuration and Management
adjacent routers.
adjacent routers, but will not send its own routing table.
table, but will not incorporate routing information from them.
adjacent routers, and will send adjacent routers it's own routing
table.
DI-206 ISDN Remote Router
37
Advertisement
Table of Contents
