Table of Contents
Advertisement
DI-206 ISDN Remote Router
TCP/IP Parameters Configuration
The parameters are described as follows:
Interface – The LAN interface must use Ethernet/Fast Ethernet and
is displayed here. This setting cannot be adjusted.
IP Address – This is the router's IP Address for the LAN interface.
Subnet Mask – This mask shows how the LAN is to be divided
into network, subnet, and host parts.
Default Gateway – This is the default gateway for the LAN. If this
router will be the default gateway for the LAN, then the address
should be 0.0.0.0.
Send BootP request upon power up – If set to Yes, when the
router boots up, it will attempt to acquire the path to the image file,
the TFTP server IP Address and the routers own IP Address.
PROM System Configuration
145
Advertisement
Table of Contents
