Table of Contents
Advertisement
DI-206 ISDN Remote Router
SNMP Trap Manager Configuration
From the SNMP Agent Configuration menu, select and enter the
SNMP Trap Manager sub-menu. You will see the following
configuration screen:
The parameters are described below:
44
Management
IP Address – Enter the IP address of the host who will act as an
SNMP Management Station. The DI-206 router will send SNMP
traps to these addresses.
SNMP Community String – The community string is a user-
defined identifying name used to group together some arbitrary set of
SNMP application entities managed by the network manager. Traps
will be sent to the IP Address (previous parameter) as long as the
corresponding Community String, in the Management Station's trap
manager software, is the same.
Configuration and
Advertisement
Table of Contents
