Configuration File Example - D-Link DI-206 User Manual

DI-206 ISDN Remote Router

Configuration File Example

# The system configuration file for D-Link DI-206 Router
# DI-206 runtime image file name (software update path and
file name)
di206-image d:\project\di206\runtime\image\206run\206run.hdr
# sysname (string name)
sysname DI-206 Router
# syscontact (string name)
syscontact Engineering Administrater, Admin
# syslocation (string name)
syslocation Myson Building 6th floor
# systimeout setting in minutes (0 means no timeout)
systimeout 10
# telnet stat (enable/disable)
telnet enable
# ip routing stack (enable/disable)
ip-routing enable
# interface decription (string name)
lan-port-1 System Lan Interface
# port stat (enable/disable)
port-stat enable
# ip address
ip-address 202.39.74.119
# subnet mask
ip-netmask 255.255.255.0
# routing protocol type (0:RIPv1, 1:RIPv2, 2:RIPv1&2)
routing-type 2
# routing operating mode (0:None, 1:Listen, 2:Talk, 3:Both)
operating-mode 0
# ip routing stat (enable/disable)
ip-stat enable
168
File
disable is the parameter you set.
Appendix F – Configuration