Table of Contents
Advertisement
DI-206 ISDN Remote Router
Configuration Utility or Telnet. Regardless, the router can always be
configured using a console connected to the RS-232 Console port.
To configure the LAN:
1. The LAN port must be enabled in the Interface Configuration
2. Enable IP Networking
3. Assign an IP address to the LAN port in the Network
22
n
sub-menu.
Choose Interface Configuration, LAN.
Position the cursor over the State item and press <space bar>.
The State will change from Disable to Enable.
Position the cursor on the SAVE option at the bottom of the
screen and press <Enter> to save the new setting.
Choose Exit in the sub-menus to return to the Main Menu.
Choose Network Configuration, IP Configuration.
Position the cursor over the third item IP Networking and
press <space bar> to Enable it.
Position the cursor on the Save option at the bottom of the
screen and press <Enter> to save the new setting.
Configuration sub-menu of the Main Menu.
Installatio
Advertisement
Table of Contents
