Table of Contents
Advertisement
DI-206 ISDN Remote Router
B1 and B2 Channel Usage – This defines whether the ISDN line is
a leased line or a normal switched line. If you are not using a leased
line connection, set this item to Switch.
Country ID – This field needs to contain the country parameter.
Without this information, the router cannot establish a connection. A
list of country ID numbers is located in Appendix E, "Country ID
Numbers."
ISDN Data – This field must contain the incoming telephone
number for data calls. In other words, it is your ISDN line's data
phone number.
A/B Adapter 1 and 2 – Enter the telephone numbers for your
voice/analog lines.
Phone 1 and 2 Call Waiting – If you have applied for and received
call waiting capabilities for your ISDN voice lines, you must enable
these settings in order for the call waiting feature to function.
There are 4 special operations for using call waiting (flash means a
very brief hanging up of the phone. In other words, for the first
option below, flash 0, click the hang up button on your phone very
quickly and then press the number 0 on your telephone's keypad):
Flash 0 – disconnect the first phone call established.
Flash 1 – disconnect the second phone call established.
Flash 2 – switch between the two phone calls.
Flash 3 – speak to both parties simultaneously (if conference calling
is enabled by your phone company).
POTS Lines – [Plain Old Telephone Service]. Enables or disables
phone calls on the Phone 1 and Phone 2 jacks on the rear of the
router.
Configuration and Management
31
Advertisement
Table of Contents
