Table of Contents
Advertisement
DI-206 ISDN Remote Router
combination ISDN router and 10 Mbps Ethernet hub, and it uses
twisted-pair Ethernet cables to connect to the host network.
Built-in Hub
As a 10 Mbps Ethernet hub, your DI-206 provides six ports for
connecting standard Ethernet devices. Five ports are designed for
connecting network end nodes—single-user computers, servers,
bridges, other routers, etc.—through standard "straight-through"
twisted-pair cables; the sixth is wired for making an "uplink" connection
to another hub or switch through the same type of straight-through
cable used to connect end nodes.
ISDN Basic Rate Interface (BRI)
Using a standard S/T the DI-206 supports DSS1 ISDN switches. The
two ISDN B-channels can be used independently for two destinations,
or they can be bundled together for one high-bandwidth connection
supporting bandwidth-on-demand.
ISDN Leased Line
If the router is set up for an ISDN leased line, it can automatically
initialize the leased-line connection each time it is powered up.
Standard Phone Jacks
The router is equipped with two standard phone jacks for connecting
telephones, fax machines, or modems. This allows the ISDN line to be
used for voice as well as data calls.
2
n
Introductio
Advertisement
Table of Contents
