Table of Contents
Advertisement
Quick Links
This product can be set up using any
current web browser, i.e., Internet Explorer
6x, Netscape Navigator 7x.
Before You Begin
1.
If you purchased this router to share your high-speed Internet connection with
other computers, you must have either an Ethernet-based Cable or a DSL modem
with an established Internet account from an Internet Service Provider (ISP).
2.
It's best to use the same computer that is connected to your modem for
configuring the DI-604UP router. The DI-604UP Broadband Router acts as a
DHCP server and will assign all the necessary IP address information on your
network. See Appendix at the end of this Quick Installation Guide or the
Manual on the CD-ROM for setting each network adapter to automatically
obtain an IP address.
Check Your Package Contents
These are the items included with your DI-604UP purchase:
If any of the above items are missing, please contact your reseller.
©2007 D-Link Networks, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective
holders. Software and specifications subject to change without notice.
• DI-604UP Broadband Router
• CD-ROM
• Ethernet (CAT5 UTP/Straight-Through) Cable
• 5V DC, 2 A Power Adapter
DI-604UP
Wired Router
with USB Printer Port
Using a power
supply with a
different voltage rating
will damage and void
the warranty for this
product.
Advertisement
Table of Contents
Related Manuals for D-Link DI-604UP
Summary of Contents for D-Link DI-604UP
-
Page 1: Before You Begin
If any of the above items are missing, please contact your reseller. ©2007 D-Link Networks, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. -
Page 2: Restart Your Computer
604UP and the other end to an available Ethernet port on the network adapter in the computer you will use to configure the DI-604UP. The LED light for LAN Port 1 will illuminate to indicate proper connection. (Note: Some computers already have network adapters pre-installed.) - Page 3 ON, the LED on the front panel should illuminate. Additional printer may be added to your DI-604UP to increase functionality. By connecting a printer to the USB port at the back of the router, you may share print capabilities over your wired network.
-
Page 4: Broadband Router
When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this: Cable or DSL Modem connected to the WAN port. DI-604UP Broadband Router Printer connected to the USB port. Computers connected to the LAN... -
Page 5: Using The Setup Wizard
Using The Setup Wizard Open your Web browser and type “http://192.168.0.1” into the URL address box. Then press the Enter or Return key. The logon pop-up screen will appear. Type “admin” the username and leave the password field blank. Click Once you have logged in, the Home screen will appear. - Page 6 Click Run Wizard You will see the following screens. Click Next Step 1 - Set up your new password. You have the option to establish a password. Click Next Step 2 - Choose your time zone.
- Page 7 Click Next The Setup Wizard (continued) Select the type of Internet connection for your router. Select one of these settings If you are unsure of which setting to select, please contact your Internet Service Provider. Click Next If you selected Dynamic IP Address, this screen will appear:...
- Page 8 “Clone MAC Address” button to automatically copy the MAC address of the network adapter in your computer. You can also manually type in the MAC address. What is a MAC address? Each network adapter has a discrete Media Access Control (MAC) address.
- Page 9 Enter in the username and password provided to you by your ISP and retype that same password to verify it. Click Next Please be sure to remove any existing PPPoE client software installed on your computers.
- Page 10 If your ISP uses PPTP and this option is selected, then this screen will appear. Enter the IP address information originally provided to you by your ISP. Click Next If your ISP uses L2PT and this option is selected, then this screen will appear. Enter the IP address information originally provided to you by your...
- Page 11 If your ISP is Big Pond Cable and this option is selected, then this screen will appear. Enter in the username and password provided to you by your ISP and retype that same password to verify it. Click Next If your ISP supports Multiple PPPoE and this option is selected, then this window will appear.
- Page 12 Your Setup is Complete! Click Restart Click Continue You will be returned to the Home tab.
-
Page 13: Test Your Internet Connection
t Your Internet Connection Click Exit Relaunch your Web browser (i.e., Internet Explorer or Netscape Navigator), to link to your favorite Web site to test your Internet connection. For additional settings or information, refer to the Advanced, Tools, or Status tabs on the web-management interface;... - Page 14 Here’s how to configure the network adapter to obtain an IP address automatically for the DI-604UP Broadband Router. Microsoft Windows XP: Go to Start > right click on My Network Places >...
- Page 15 Apple Macintosh OS X: Go to the Apple Menu and Select System Click on Preferences. Network Select Built-in Ethernet in the Show pull-down menu Select Using DHCP in the Configure pull- down menu Click on Apply Now The IP address information, the Subnet Mask, the Router’s IP address and the Ethernet adapter address will appear.
-
Page 16: Technical Support
Technical Support D-Link’s website contains the latest user documentation and software updates for D-Link products. Canadian customers can contact D-Link Technical Support through our website or by phone. Tech Support for customers within Canada: Telephone: (800) 361-5265 Mon. to Fri. 9:00AM to 9:00PM World Wide Web http://support.dlink.ca...