Connecting To The Ethernet; Connecting To An Isdn Bri Line - D-Link DI-304 User Manual

DI-304ISDN Remote Router

Connecting to the Ethernet

A. Connecting to PCs:
Note: If the Ethernet cable is not long enough to reach your PCs, purchase a longer
B. Connecting to an External Ethernet Hub:
Note: If the Ethernet cable is not long enough to reach the external hub/switch, purchase

Connecting to an ISDN BRI Line

A. S/T-Interface Model
B. U-Interface Model
1. Attach the Ethernet cable to any P1 ~ P4 port.
2. Connect the other end of the Ethernet cable to your PCs' installed network
interface card (NIC).
3. The LED indicators at both the Ethernet port and the NIC should be ON.
straight-through Cat. 5 UTP or STP Ethernet cable.
1. Attach the Ethernet cable to the Uplink port.
2. Connect the other end of the Ethernet cable to the external Ethernet hub or switch.
3. The LED indicators on both the Uplink port and the external Ethernet hub or
switch should be ON.
a longer straight-through 10BASE-T Ethernet cable, or connect two shorter cables
to create a cable of sufficient length.
1. Locate the ISDN cable.
2. Plug one of the RJ-45 connectors on the cable into the ISDN port on the rear
panel of the router.
3. Plug the other end of the cable into any of the NT-1 (or NT1 plus) S/T-interface
ports.
1. Locate the ISDN cable.
2. Plug one of the RJ-45 connectors on the cable into the ISDN port on the rear
panel of the router.
12