HowToInstall - Orion OPM-4240 User Manual

OPM-4240 / OPM-4240R
2. How to install
y
Install this set only at a location where adequate ventilation is available.
How to assemble handles
1.ProductispackedinaboxasshowninFigure1.
2.PleasecarefullyremovethePackingBagwithaknifeorapairofscissors.
※ Please check front and rear side before you cut the bag to prevent any damages
on panel or set.
Packing Bag
[Figure 1]
3. P leaseassemblehandleswiththeboltsthatareintheaccessoryboxtothe
rearsideasshowninthefigure.
Handles
[Figure 3]
Panel protection
[Figure 2]
[Figure 4]
10
Infinitely Expandable
How to move MPDP
1.2peopleholdeachhandleonproduct'sbackside.
Panel protection
Handles
2. I tneedstwopeopletocarryorinstallthisproduct.
Please hold the handles in the back and the front bottom part at the same time.
- Please do not grab the panel, but grab bottom of master frame when you carry or install the products.
- Please use gloves when you carry or install the products.
Panel protection
※Attention:
-  D onotremovethepanelprotectionpaduntilasetiscompletelyinstalledonastandorawallhanger.
PleasecarefullyremovePanelprotectionpadtopreventanydamagesontheproduct.
-Please make sure to use panel protection when you move, carry or rent MPDP.
11
Panel
Master frame
MPDP