Advertisement
2.2.
How to Install
First, make sure that the front power button is turned off.
If you press button, button is locked and power will be turned on. And then press again the button,
button is released and power will be turned off.
2.2.1.
SDI Connection
Turn off the power button.
Connect the required cables for video signal input and output.
Connect the AC power cord's connector to the AC power connector on the AC/DC adaptor.
Connect the 4-pin female XLR connector of adaptor to the back of monitor.
Insert AC power cord's plug to an AC outlet (100-240V @ 50/60 Hz).
Turn on the power button.
○
5
XLR Connector: 4PIN XLR Connector, 12VDC
1
SDI IN: BNC (75Ω Terminated), SMPTE-424M, SMPTE-292, SMPTE-259M.
2
SDI OUT: BNC (75Ω Terminated), SMPTE-424M, SMPTE-292, SMPTE-259M.
3
GPI: D-SUB15, General Purpose Input.
4
Installation and User's Guide
Holes for Rack mount
○
1
○
4
○
○
2
3
6
5.2. Dimension[Units :mm] for OIC-5003
FIGURE 2. OIC-5003
Installation and User's Guide
15
Advertisement
