Orion OPM-4240 User Manual page 28

OPM-4240 / OPM-4240R
3.3. Multi-Scale
Screen expansion command for MPDP
-
Command Code
-
0xDD (DVI), 0xDE (PC), 0xDF (DTV), 0xE0 (DVD), 0xE1(S-Video), 0xE2 (Video)
One way communication (Send to PDP)
-
Data: ID (1 byte) +X/Y(1 byte) + P(1 byte)
-
X: the number of horizontally installed MPDP
Y: the number of vertically installed MPDP
P: the location of expanded scale
X/Y: upper position 4bits - X (Max: 15), lower position 4bits - Y (Max: 15)
e.g.) 0x44 for 4 x 4 screens, 0xFF for 15 x 15 screens
e.g.) Screen expansion condition of 2x2 among 3x3 MPDP 3 sets. (Input-Source - DVI)
-
STX CMD Length ID X/Y
Value 0x02 0xDD 0x03 0x01 0x22 0x01
Value 0x02 0xDD 0x03 0x02 0x22 0x02
Value 0x02 0xDD 0x03 0x04 0x22 0x03
Value 0x02 0xDD 0x03 0x05 0x22 0x04
1.Select"DVI"from"SourceSelect"
2.Drag2x2bymouse
※Incaseexecute"①"→"②"or
Play"①"→"③",allMPDPsetsareturnedinto1:1screen.
-"X/Y"valueis0x22,"P"valueis"0x01"
3.4. Information
Information display command for set (Input source and Resolution)
-
The information will be displayed on the selected PDP
-
after this command. (OSD display)
Command Code: 0x42
-
One way communication (Send to PDP)
-
Data: ID (1 byte)
-
e.g.) Set information check for MPDP ID No.1
-
STX CMD Length ID
Value 0x02 0x42 0x01 0x01
1.Selectdesiredsetbyclickingtherightbuttonofthemouse.
2.SelectONEPDPandClick"INFO"ontherightside
※ I fyouneedtochecktheallMPDPsets,selectALLPDPatthestep"①"and
executestep"②"
-ExecuteBroadCastwiththe"ID"areavalueof"0x00"
ID : 1 ID : 2 ID : 3
➋
ID : 4 ID : 5 ID : 6
P ETX
0x03
0x03
ID : 7 ID : 8 ID : 9
0x03
0x03
➌
➊
ID : 1 ID : 2 ID : 3
➋
ID : 4 ID : 5 ID : 6
ID : 7 ID : 8 ID : 9
ETX
0x03
➌
➊
52
3.5. Auto-Power Mode
The command for set or cancel automatic power on when AC power is connected
-
Command Code: 0x62(Set), 0x63(Cancel)
-
One way communication (Send to PDP)
-
Data: ID (1 byte)
-
e.g.) Set or Cancel Auto Power mode for the ID No. 1 MPDP
-
STX CMD Length ID
Value 0x02 0x62 0x01 0x01
 IfyouneedtosetorcancelAutoPowerModeforallMPDP,setthevalueofIDareaas"0x00".
※
3.6. Global Offset
Command for removing the image data of the seam area (set) for better continuous image or displaying the image data of the seam area (cancel).
-
Command Code: 0x74 (Set), 0x73 (Cancel)
-
One way communication (Send to PDP)
-
Data: ID (1 byte)
-
e.g.) Set or cancel Global Offset command for MPDP ID No.
-
STX CMD Length ID
Value 0x02 0x74 0x01 0x01
※  IfyouneedtosetorcancelGlobalOffsetModeforallMPDP,setthevalueofIDareaas"0x00".
3.7. Test Pattern
Command for check the set condition with the internal test pattern.
-
Command Code: 0x57 (Red), 0x58 (Green), 0x59 (Blue), 0x5A (White), 0x5B (Screen)
-
To return to main screen: 0x5B
-
One way communication (Send to PDP)
-
Data: ID (1byte)
-
e.g.) Set or cancel White Test Pattern for MPDP ID No. 1
-
STX CMD Length ID
Value 0x02 0x5A 0x01 0x01
※  IfyouneedtosetorcancelTestPatternforallMPDP,setthevalueofIDareaas"0x00".
3.8. Position
Command for moving screen position of Component(DTV, DVD), Composite(Video), and S-Video image input.
-
Command Code: 0x6E (Up), 0x6F (Down), 0x70 (Left), 0x71 (Right), 0x72 (Center)
-
Data: ID(1 byte)
-
e.g.) Move to the left side or cancel for MPDP ID No.1
-
STX CMD Length ID
Value 0x02 0x70 0x01 0x01
※  IfyouwanttosetthepositionofallMPDP,setthevalueofIDareaas"0x00".
Infinitely Expandable
ETX STX CMD Length ID ETX
0x03 0x02 0x63 0x01 0x01 0x03
ETX STX CMD Length ID ETX
0x03 0x02 0x73 0x01 0x01 0x03
ETX STX CMD Length ID ETX
0x03 0x02 0x5B 0x01 0x01 0x03
ETX STX CMD Length ID
0x03 0x02 0x72 0x01 0x01
53
ETX
0x03