Table of Contents
Advertisement
OPM-4240 / OPM-4240R
※attachment : aSCii to HEX Conversion Table
STX
02
ETX
03
※Hex code value according to Set iD
iD 1
iD 2
id[0] = 0x30
id[0] = 0x30
id[0] = 0x30
id[1] = 0x31
id[1] = 0x32
id[1] = 0x33
iD 6
iD 7
id[0] = 0x30
id[0] = 0x30
id[0] = 0x30
id[1] = 0x36
id[1] = 0x37
id[1] = 0x38
iD 11
iD 12
id[0] = 0x30
id[0] = 0x30
id[0] = 0x30
id[1] = 0x3B
id[1] = 0x3C
id[1] = 0x3D
iD 16
iD 17
id[0] = 0x31
id[0] = 0x31
id[0] = 0x31
id[1] = 0x30
id[1] = 0x31
id[1] = 0x32
iD 21
iD 22
id[0] = 0x31
id[0] = 0x31
id[0] = 0x31
id[1] = 0x35
id[1] = 0x36
id[1] = 0x37
(MPDPD 5X5)
iD 3
iD 4
iD 5
id[0] = 0x30
id[0] = 0x30
id[1] = 0x34
id[1] = 0x35
iD 8
iD 9
iD 10
id[0] = 0x30
id[0] = 0x30
id[1] = 0x39
id[1] = 0x3A
iD 13
iD 14
iD 15
id[0] = 0x30
id[0] = 0x30
id[1] = 0x3E
id[1] = 0x3F
iD 18
iD 19
iD 20
id[0] = 0x31
id[0] = 0x31
id[1] = 0x33
id[1] = 0x34
iD 23
iD 24
iD 25
id[0] = 0x31
id[0] = 0x31
id[1] = 0x38
id[1] = 0x39
64
7. Other tips
7.1. Before calling for service
Before calling for any repair, check the following and then refer to a near A/S center.
▶"Tick" sound from the main body.
y
If there is no problem with the screen or sound, the "tick" sound is likely to result
from the cabinet lightly shrinking with the change of room temperature. The sound
does not affect product's performance.
▶no image at upper and lower part of the screen.
y
As for a screen which is over 16:9 in width (such as cinema-sized one), no image
may be displayed at upper and bottom part of the screen.
▶Speckles or white lines on the screen
y
Check whether the problem is caused by vehicle, streetcar, high-voltage cable or
neon sign, which emitting interference wave or electromagnetic induction. Avoid any
interfering object.
▶Screen or a PDP Set is hot
y
PDP sets or screen can be hot, because basic principle of PDP driving is Plasma
discharge between electrodes.
y
It is not a defect or a malfunction of the product, you may continue to use the product.
Infinitely Expandable
65
Advertisement
Table of Contents
