OPM-4240 / OPM-4240R
5.5. Multi-screen configuration
Screen Configuration Setting
1
InputthenumbersofXandY
-
X is for the number of row and Y is for column.
-
X and Y can be selected within the range from 1 to 15. The maximum MDPD quantity of MSCS
control is 100 sets.
-
MPDP image of selected numbers of X and Y is displayed in the Screen configuration in one
second after setting the number.
2
SelectoneofinputsourcesfromDVI,PC,DTV,DVD,S-VIDEO,or
VIDEO.
3
Executionoftheconfiguration.
-
When you click "PLAY"button after selecting input source from Source select and the numbers of
X and Yin MPDP Configuration, the configuration of MPDP is generated as shown in the figure
below.
※
inFO
:
-
Check the resolution of the input source. It is displayed at the upper right corner of the screen.
-
Check the signal. If there is no input signal, "No signal" is displayed.
30
5.6. MSCS instruction
y
Check "ALL PDP" to send data to all connected MPDP regardless of ID.
MPDP Control - Power On/Off
y
In order to control power of specific MPDP, use "Power On/Off" button after selecting the specific MPDP.
Pleasewaitforatleast10secondsbeforeexecuting"PowerOn"commandafter
thefirstACpowerconnection.Ifnot,itmaycauseabnormalbehavior.
Caution
PleasedisconnectACpowerandreconnectincaseofabnormalbehavior.
5.7. iD Setting
y
ID of MSCS(Multi Screen Control System) is set automatically.
ID 1
ID 2
ID 4
ID 5
ID 7
ID 8
Example of MPDP ID Setting
(Input signal is DVI, Configuration is 3 by 3)
y
To send a command to the desired MPDP set, select ID of the MPDP from Screen Configuration.
y
Select ID using right button of mouse. Selected ID is displayed with red square box.
Infinitely Expandable
ID 3
ID 6
ID 9
31