Power On Printer And Print Self - Test Page; Power On Printer; Print Self-Test Page; Guide For Hexadecimal Dumping Mode - SNBC BTP-R990 User Manual

Table of Contents

4.9 Power on printer and print self-test page

1) Confirm that the printer is connected to power;

2) Turn on the power switch to power on the printer.

1) Confirm that the printer is connected to power, and load paper roll;

2) Confirm that the printer is switched off;

3) Press down the FEED button while turning on the printer power, the printer will print out

configuration information and prompt characters "Press feed key to continue". Then printer enters

pause and waiting status, and the ERROR LED is flashing;

4) Press down the FEED button momentarily, the printer will print a character test page, and the

printing of self-test page is complete.

5) Following step 3), the printer will enter button configuration mode (Parameter setting (configuring) by

Feedbutton) if pressing down the FEED button for a long time at this time. Refer to Appendix Button

Configuration Menu for detailed function and operation methods of button configuration mode.

This function prints the data transmitted from the host computer in hexadecimal numbers and in their

corresponding characters.

Print sample in Hexadecimal Dump mode:

Start hexadecimal dumping by executing either of the following:

a. Open the top cover, turn the power on while pressing the Feed button until the printer alarms

(LED flashes, buzzer beeps), and then close the top cover, then the printer will enter

hexadecimal dump mode. Please wait for the printer alarm after turning on the power,

otherwise the printer will not enter hexadecimal dump mode.

b. Execute the GS ( A command.

The printer first prints "Hexadecimal Dump To terminate .....", and then prints the received print

data in hexadecimal numbers and in their corresponding characters.

After printing has been finished, Hexadecimal dumping ends by executing any of the following:

a. Turn the power off.

- 11 -

BTP-R990 User's Manual

Table of Contents