F: Flow Control Enable/Disable - LevelOne FSW-1640TX User Manual

Set Port Duplex Mode
---> Select port # : 4
Warnning : Auto-Negotiation is Enable on this port
force to change will disable AN !
---> [F]: Full duplex
[H]: Half duplex
[ESC]:Exit
---> Please select: H Half Duplex Mode.
Set Port # 04
Press 'SPACE BAR' to continue

6.3.5 F: Flow control enable/disable

Which can show and set the flow control capability of the ports. The default
value for flow control capability is enabled.
For example: disable port#5's flow control capability.
Set Port Flow Control Capability
---> Select port # : 5
---> [E]: Enable flow control capability
[D]: Disable flow control capability
[ESC]:Exit
NOTE : flow control capability only apply to full-duplex mode
---> Please select: D Flow Control Capability Disable.
Set Port # 05
Press 'SPACE BAR' to continue
NOTE: Until the cables connect to the corresponding ports (it means the LINK
status should display as UP), the port status shown above are now ineffective.
If Auto-Negotiation is enable, the function has no effect on the speed
selection and duplex-mode setting.
LevelOne FSW-2440TX
24-Port Smart Switch
====================
LevelOne FSW-2440TX
24-Port Smart Switch
====================
17