E: Port Enable/Disable; A: Port An Enable/Disable Or Reset - LevelOne FSW-1640TX User Manual

duplex mode selection. Force to change duplex mode if and only if the Auto
Negotiation mode will be disabled.
F: set flow control ENABLE/DISABLE, the Flow Control capability for the port.
Use this screen to enable or disable Flow Control capability of full duplex
mode for the port. The flow control result will depend on the result of Auto
Negotiation. For Smart Switch, pause enable or disable will depend on link
partner's Flow Control Capability.

6.3.1 E: Port Enable/Disable

This function can disable or enable transmit and receive of select port, default
value is port enabled.
For example: Select port#01 and press 'D' to disable port 1.
Set Port Rx/Tx Enable/Disable
---> Select port # : 1
Select Port is Tx/Rx Disabled now
---> [D]: Disable
[E]: Enable
[ESC]: Exit
---> Please select: D Disable.
Set Port # 01
Press 'SPACE BAR' to continue

6.3.2 A: Port AN Enable/Disable or Reset

Which indicates the current auto-negotiation status of the ports. Enable or
disable the auto-negotiation when connect with another device. The default
value is auto-negotiation enable.
For example: disable port#02's AN function.
LevelOne FSW-2440TX
24-Port Smart Switch
====================
15