Windows Mobile Connection - SecurityMan iCamDVR User Manual

Windows Mobile Connection

Activate/enable the mobile network on mobile phone first
to ensure accessible to the internet and then run "Inter
net Explorer". Input in the server's address in the Address
(URL) to get to the following connection screen as shown
below in Figure116.
Click on the "PCam v.2.2.0.1" link in blue and a "Download"
confirmation dialog box will pop up as shown below in
Figure 117.
Make sure the "open file after download" is checked and
then click on "yes" to start downloading and installing
Pocket Camera software to the windows mobile. After
installation is completed the following windows will
re-appear as shown below in Figure 118. Click on "PCam
v.2.2.0.1" link in blue in figure 118 again to access Pocket
Camera graphic interface as shown below in Figure 119.
Since the server's address has been inputted in from
figure 118 below, it is not necessary to change the server's
address shown in the login screen below. Please input in
"User" name and user "Password" respectively in the Pcam
login windows below. Finally, click on "Go" to login to the
server. Successful login windows will appear as shown
below in figure 120 if the server address, username and
password are inputted correctly.
73 | SecurityMan
Channel one is the default displaying channel after a
successful login. To select or change channel select
by clicking on the drop down menu of "Channel" as
illustrated below in figure 121.
Click "Stop" to disconnect and exit at anytime.
figure 116 - Connection Screen
figure 118 - Connection Screen.
figure 117 - Download Dialog Box
figure 119 - PCam Main Interface Login Screen