To Change User's Rights/Privileges; To Add User - SecurityMan iCamDVR User Manual

To Change User's Rights/Privileges

Highlight one of the user from Login Username under User
Configuration (refer to Figure52 above), and then click on
"Edit" to enter Edit User windows as illustrated below in
figure 53.
figure 53 - edit User Rights/Privileges
The edit User windows can be used to edit password and
rights/privileges of a user, but not the user's name which is
grayed-out. Click on oK to accept the changes or Cancel
to cancel the changes.
SuperDVR offer three levels of rights/privileges and they
are as follow:
• Administrator: The administrator user has the highest
rights/privileges to change just about anything they
wish to do, including all the settings and playback fea-
tures; they are the controller of the system.
39 | SecurityMan
• Power user should have: Has fewer privileges than
administrator level. To grant rights and privileges to
Power User account, place a check mark or undecked
the boxes for each of the categories; Emap Alarm,
Playback, PTZ Control, basic Configuration, Schedule
Configuration, Video ProcAmp, Motion Configuration,
Alarm Configuration, PTZ Configuration, Capture and
Urgent Record.
• Normal user should have: Have the fewest privileges of
all. To grant rights and privileges to Normal User ac-
count, place a check mark or undecked the boxes for
each of the categories; Emap Alarm, Playback, PTZ Con-
trol, basic Configuration, Schedule Configuration, Video
ProcAmp, Motion Configuration, Alarm Configuration,
PTZ Configuration, Capture and Urgent Record.
NoTICe
Administrators can change Power users and Normal users'
rights, but cannot change other administrators' rights or privi-
leges.

To add User

Click on the "add" button in User Configuration (refer to
Figure52 above) to access the add user windows as shown
below in figure 54.