SecurityMan iCamDVR User Manual page 35

figure 47 - View the Map
When motion is detected, the CAM1~4 icons will flash
yellow meaning MOTION_ALARM for any camera(s) that
detects motion. If there is multiple MAP zone enabled,
the MAP icons will changes from blue to red which means
that MAP zone has alarm triggers. Select "auto Show"
will enable Emap to pop-up whenever there are motion
alarms until the alarm expired. auto Show enabled pro-
vides quick alarm position as to which camera triggered
the alarm.
Right click on any CAM1~4 to pull up live camera image in
Emap view as illustrated above.
35 | SecurityMan
figure 48 - emap Camera View
NoTICe
1. The map tree currently supports up to three levels, any
levels exceeding three will be invalid.
2. Loading picture(s) to Emap, if any side of length or width
of the picture loading exceeds the size of the default
pixels frame will be enlarge or shorten to proportion and
standardize. The default picture frame pixels size is 833 by
678 resolutions.
3. In Emap interface, right click on camera will display live
camera image on the spot.
4. If "auto Show" is selected E-map will pop-up automati-
cally on alarm triggering, the E-map tab interface allows
setup for "Holding Time" for Auto Show to be automati-
cally closed. "auto Show" becomes invalid if e-map is
manually opened.