SecurityMan iCamDVR User Manual page 52

Any direct connected printer(s) that connects to the host
computer or other network printers may be selected and
configured to print, as shown above in figure 77.
The Print icon will become active and selectable if and
only if it is in single channel playback mode and the Pause
button is applied. To access Print window please click on
the Print button from the playback panel and the fol-
lowing Print window will appear:
figure 78 - Print Window
The Print window has the ability to position the image to
a desire location of the page, re-size the image (larger or
smaller), and provides title/time selection.
52 | SecurityMan
Select and then click
move the picture upward, downward, leftward and
rightward. Select and then click
zoom in and out the image. Press
the original size and position. Move the image to the best
desire position and then click on the "Print" button to print.
Press on the "Exit Print" at any time to exit out of Print
screen.
NoTICe
Print window will only be enable or active to select during
single channel mode playback and the Pause button applied.
If the time/date stamp already exists on the image, please do
not select/check the "Time" under the Page
During single channel playback pause mode the color con-
trol panel in figure 79 will appear. The color panel consists
of brightness, contrast, saturation, hue, and default. Please
adjust the color panel to the best possible image before
printing out the image. Press the "Default" button at any
time to default the color panel settings.
figure 79 - Color Panel
or to
, to
to return to