1. Manuals
  2. Brands
  3. SecurityMan Manuals
  4. DVR
  5. iCamDVR
  6. User manual

SecurityMan iCamDVR User Manual

Usb internet camera & dvr convertor box
Hide thumbs Also See for iCamDVR:
Table of Contents

Advertisement

Quick Links

Download this manual
iCamDVR User's Manual
Easily turn Security camera
into an Internet Security WebCam!
USB Internet Camera & DVR Convertor Box

Advertisement

Table of Contents
loading

Related Manuals for SecurityMan iCamDVR

Summary of Contents for SecurityMan iCamDVR

  • Page 1 User’s Manual Easily turn Security camera into an Internet Security WebCam! USB Internet Camera & DVR Convertor Box...
  • Page 2 The liability of SecurityMan arising from this warranty and sale shall be limited furnished for informational use only, is subject to change without notice, to a refund of the purchase price. In no event shall SecurityMan be liable for and should not be construed as a commitment by SecurityMan. SecurityMan...

  • Page 3: Table Of Contents

    TaBLe of CoNTeNTS Introduction System Setup iCamDVR product features Basic Configuration Panel System Requirements Dwell Interval iCamDVR Specifications Caption Resolution Hardware Driver Software Installation D-Interlace iCamDVR Live Audio Windows Vista/7 Driver Software Installation Storage Disk Windows Vista/7 Driver Software Uninstall...
  • Page 4 Date Search To Change User’s Rights/Privileges Record Events To Add User Control Buttons and Functionality Backup Recorded File To Delete User Mobile Surveillance PaN/TILT/ZooM Control iPhone, iPad, and iTouch Application iPhone, iPad, and iTouch Application via PC 4 | SecurityMan...
  • Page 5 Troubleshooting Using SuperCam Live View System requirements for iCamDVR & Remote Image Playback Client Computers Video Playback Installation Instruction: Server List Troubleshooting Settings Storage aPPeNDIX Display Alarm I: iPad Software installation and Operation Install Through PC Information Operation Help II: Smart Phone Operation System Compatibility...

  • Page 6: Introduction

    Motion detection area and motion sensitivity level is adjustable. Each of the 4 channels is independently operated. Motion detection sensitivity level can be The iCamDVR system is a 4 channel USB Internet camera adjusted for each significant channel. The system and DVR adapter which implements MPEG4 compression...
  • Page 7 Supports dynamic domain name server. • Remote Surveillance and P.T.Z control through Intranet and Internet. • One iCamDVR to a PC, the maximum frame rate can reach 30 fps with 4 channels. • Pre-Alarm recording, buzzer alarm, email alarm out. •...

  • Page 8: System Requirements

    We recommend Intel motherboards, chipsets and CPUs or other equivalent system components similar to the minimum system requirements or greater. The following are other motherboards, iCamDVR Minimum System Requirements is shown as chipsets and CPUs that are known to be compatible: Table1.

  • Page 9: Icamdvr Specifications

    Specifications • Video format: NTSC/PAL (selectable). • Resolution: 320x240/ 640x480(NTSC), 352x288/ 704x576(PAL). • Maximum Frame rate per channel: 30 ftp (NTSC) 4 channels; 7.5fps each channel (option), 25 fps (PAL) 4 channels; 6.25fps each channel. • Screen set: resolution 1024_768, color quality 16 bits or 32 bits @ 96% DPI •...

  • Page 10: Hardware Driver Software Installation

    Windows Vista/7 Driver Software Installation Support Windows 2000, XP, Vista, 7(32-bit/64bit) oS Plug in iCamDVR hardware to the computer via USB2.0 port. Insert the auto run CD into the CD/DVD ROM tray to USB Connection automatically install the driver software and the following...
  • Page 11 NTSC countries select PAL and then click “Next” to trust this program. I know where it’s from or I’ve used it continue setup. before.” to continue installation as illustrated below. figure 4 - automatic figure 6 - Select Video format 11 | SecurityMan...
  • Page 12 9 - Program Compatibility assistant Click “Cancel” to temporary cancel the installation If the iCamDVR hardware is not connected to the com- process. To resolve it ensure the iCamDVR is securely puter or has loose connection with the computer, in such...
  • Page 13 11 - Select Installation Pass Click “finish” and restart the computer to complete driver Select Program Folder Setup click “Next” to continue software installation. installation. figure 12 - Register application figure 14 - Driver and application Installation finished 13 | SecurityMan...

  • Page 14: Windows Vista/7 Driver Software Uninstall

    Windows Vista/7 Driver Software Uninstall There are several methods to uninstall the driver software for iCamDVR. One way is to auto run the CD and pretends to re-install the driver software. The following windows will appear to confirm driver software uninstall. Click “oK” to figure 15 - iCamDVR Hardware continue with uninstall.

  • Page 15: Windows 2000/Xp Driver Software

    “Control Panel > Add or Remove Programs”, and click or select “SuperDVR” to Change/Remove it. To execute and run the SuperDVR software for iCamDVR; go to “all Program > SuperDVR” or simply double click on the SuperDVR shortcut located on the desktop as figure 18 - Programs and features shown below.

  • Page 16: Main Display Interface

    Space Blue Bar indicator will display in megabit the number of free disk space is available out of the total free space by placing the mouse cursor over the blue bar. figure 21 - Display control panel 16 | SecurityMan...

  • Page 17: Quick Channel Display Switch

    The default User name is case sensitive “SYSTEM” and the into the path directory to double click on the bitmap default Password is no password (blank). image(s) and the default picture view software for the system will open to view the image. Use the viewer 17 | SecurityMan...

  • Page 18: Record Status Panel

    NoTe It is strongly recommended that the default user name and password be change by the system administrator of iCamDVR. figure 23 - Record Status Panel and alarm output Status Panel Manual Record Mode Manual Record Mode is the most common record mode used.

  • Page 19: Motion Detection Record Mode

    • Finally, configure the motion detection areas and sen- sitivity level for each camera(s) in the “Motion_Detec- tion configuration” 19 | SecurityMan...

  • Page 20: System Setup

    There are a total of 7 different The return button is used to return or exit out from Configuration panels in all and they are as follow from the Config menu. top to bottom: 20 | SecurityMan...

  • Page 21: Basic Configuration Panel

    Live audio has three options; None, Audio1, and Audio2. a period of 5 seconds before automatically switching to Choose the audio channel according to the audio camera 2 and so on. hardware connections of the iCamDVR. To setup the 21 | SecurityMan...

  • Page 22: Storage Disk

    0 to 255 and default setting is 126. recording, simply uncheck the “Recycle” option in which the iCamDVR will stop to record when all the selected HDD Storage Disk displays all the available disk drives or partitions are full.
  • Page 23 To configure windows auto login, input the administrator windows login user name and password as show below in Figure 29. 23 | SecurityMan...

  • Page 24: Record Setup Panel

    NoTe above. Each of the four cameras’ recorded files is saved in if 4 cameras are connected to the iCamDVR be sure to check/ select all 4 camera switch to enable. separate folders under different name. All record file has...

  • Page 25: Manual Record Frame Rate

    If space is limited, please use the detection. Motion detection depends solely on the Motion default Medium setting which is best for balancing picture Detection setup under the Schedule Configuration panel. quality vs. space. 25 | SecurityMan...

  • Page 26: Audio In

    Audio input can be setup to record audio and are select- able between audio1, audio2 or none (no audio recording or no microphone connection). The iCamDVR provides two audio hardware channels but only one audio channel can be selected to be active for recording. Please select the audio channel that is the closest to a desire camera loca- tion for recording.
  • Page 27 Please follow the three easy STEPs above to continue with Motion Detection and alarm output configuration setup. Click on the Return button to exit out of Schedule Configuration or select the next panel to con- tinue with configurations. 27 | SecurityMan...

  • Page 28: Video Proamp Panel

    CAM), click on Select All to select all area to be sensitive to motion detection, or click on Clear to reset/clear all the figure 34 - Video Configuration motion detection area(s). All active Motion detection area(s) will have a green highlight box/rectangular appearance. 28 | SecurityMan...

  • Page 29: Set Motion Detection Sensitivity

    Disk shortage alarm age alarm setting ranges from 0%, 25%, 50%, and 75%. provides alarm buzzer via computer built-in buzzer and/or The default percentage is set to 25%. email administrator via smtp/pop server. Please proceed 29 | SecurityMan...

  • Page 30: Pre-Alarm Record

    To setup the “From” email account in automail it or email once SuperDVR detects there is a shortage in requires Mail Server Setup such as SMTP Server (example; disk space at certain setup percentage. Motion1~4 can smtp.securitymaninc.com, mail.yahoo.com), SMTP Port 30 | SecurityMan...
  • Page 31 The email account setting for both the receiver and sender can be the same. Compatible with Yahoo mail, Gmail, etc. Please refer to the mail server for SMTP server, SMTP port, user ID and password. figure 40 - Message Sent Successfully Test 31 | SecurityMan...
  • Page 32 (2min), 300 (5min), 600 (10min) seconds. This is the dwell time that it will take before an additional email to be active until the next event email occurs. During the dwell time or Set Mail Interval time if any events occurred during 32 | SecurityMan...

  • Page 33: Emap Function Configuration

    Browse for the geographic picture i.e. c:\superdvr to select the ideal picture region or building map. Then open the picture file and the picture file will display in this interface figure 43 - emap edit alarm Configuration 33 | SecurityMan...

  • Page 34: To View The Emap

    SuperDVR figure 45 - emap CaM1~4 Installation software interface to enter and view Emap geographic area and cameras. Cameras cannot be moved or re- arranged in Emap viewing panel as illustrated in figure 47 below. 34 | SecurityMan...
  • Page 35 Right click on any CAM1~4 to pull up live camera image in setup for “Holding Time” for Auto Show to be automati- cally closed. “auto Show” becomes invalid if e-map is Emap view as illustrated above. manually opened. 35 | SecurityMan...

  • Page 36: P.t.z Configuration Control Panel

    RS485 port. Once a PTZ protocol camera is plugged connected to iCamDVR unit. The current supported PTZ into the computer via serial port, the serial port can then be configured or selected from the Serial Port options in protocols are as follow;...

  • Page 37: Serial Ports Setting

    Port – COM or communication port. Please match Serial Port Setting this COM port to the serial COM port setup under the protocol configuration. After the Protocol configuration is completed, advance to the Serial Port Setting as illustrated below in figure 51. Se- 37 | SecurityMan...

  • Page 38: User Configuration Panel

    NoTICe Please refer to the P.T.Z protocol camera manual/guide for serial port setting such as Baud Rate, Protocol, Data Bits, Parity, Stop Bits, and Address prior to PTZ Configuration. figure 52 - User Configuration 38 | SecurityMan...

  • Page 39: To Change User's Rights/Privileges

    Figure52 above) to access the add user windows as shown wish to do, including all the settings and playback fea- below in figure 54. tures; they are the controller of the system. 39 | SecurityMan...

  • Page 40: To Delete User

    “oK” to accept and create the user account. To Delete User Select the user name from the User Configuration list (refer to Figure52) and click the “Delete” button and oK to confirm. See figure 55 below: figure 55 - Delete User Confirmation windows 40 | SecurityMan...

  • Page 41: Pan/Tilt/Zoom Control

    Pan, Tilt, Zoom, Focus, and Iris controls as needed. Let’s Focus in/out, Zoom in/out, and Iris in/out buttons. Click take a look at the PTZ control panel below in figure 57 in on the accordingly to adjust Iris, Focus more detail. and Zoom corresponding values. 41 | SecurityMan...
  • Page 42 PTZ Config below for Preset and GROUP setup. Click on the Config button to access Preset and GROUP configuration setting as illustrated in figure 60 figure 58 - Speed Control below. 42 | SecurityMan...
  • Page 43 “Name”. The “Name” can be change by typing the new name into the name field. Next figure 59 - Preset and is to manually control the PTZ camera image to a desired GRoUP select 43 | SecurityMan...
  • Page 44 PTZ models. If preset fails to save, please try to remote acess using IE 6.0 or above and then configure the desire preset positions. figure 62 - Before Save Preset figure 61 - Group Configuration figure 61 - Group Setup Configuration 44 | SecurityMan...

  • Page 45: Search And Playback Panel

    0 to 24 hours and playback playback and they are as follow: controls, and “D” consists of date search, original or backup • Search by Date Search files search, playback time display, volume control, search 45 | SecurityMan...
  • Page 46 “original files” from superDVR records. To playback backup files, select the “Backup files” to search and browse for the backup recorded file from the computer to playback. figure 66 - Record Playback Controls 46 | SecurityMan...
  • Page 47 Motion (yellow) Record Events pause button first (a must) and then the Previous Frame Manual (teal) Record Events button to advanced reverse frame-by-frame playback. This button will become valid during single channel playback Schedule (green) Record Events 47 | SecurityMan...
  • Page 48 24 hours scale as shown in figure 68 above. The left side shows the available channels, active/enable figure 71 - Single CH Configuration Window channel(s) has a check marked in the front and has gray 48 | SecurityMan...

  • Page 49: Backup Recorded Files

    • Operation – Display the total megabytes size which 49 | SecurityMan...

  • Page 50: Delete Recorded Files

    Place a check mark on the “attach ap- and megabytes to be deleted), the following confirmation plication” to include the playback software/application windows will appear: with the file backup for convenient playback. Finally, click 50 | SecurityMan...

  • Page 51: Capture Picture

    Print Setup button from the playback panel become active. Click on the icon and the following to access print setup windows as shown below: Snap windows will appear: figure 76 - Capture Picture figure 77 - Print Setup 51 | SecurityMan...
  • Page 52 The Print window has the ability to position the image to a desire location of the page, re-size the image (larger or smaller), and provides title/time selection. figure 79 - Color Panel 52 | SecurityMan...

  • Page 53: Image Zoom In / Out

    1X, click twice to zoom out to 2X, and so on. • Click the Default Size to default image back to the original size. For example: figure 82 - Zoom out figure 80 - original Size 53 | SecurityMan...

  • Page 54: Remote Surveillance & Playback

    Internet Explorer 6.0 or above browser and the WebCam window will appear. Click on Login to log into the iCamDVR via intranet. HTTP Port – is a web service & downloading service port, default port is 80.

  • Page 55: Remote Webcam Live Surveillance

    For example, the server’s IP address is 211.148.96.234, and the port number is 81, then input windows will appear as shown below. Confirm User Name, http://211.148.96.234:81.. Password, Data Port and Command Port to be correct, click 55 | SecurityMan...
  • Page 56 To toggle between single camera and four camera view, to the iCamDVR. Highlight the PTZ camera channel and click on the Screen 1 and Screen 4 accordingly. In single the PTZ controls will become active. For Pan/Tilt/Zoom channel view double-click on the camera icons in the up- controls, i.e.

  • Page 57: Remote Playback (Rpb) Panel

    “Disable audio” allows to enable and disable the audio steaming (local microphone is required to be plugged into the iCamDVR). Select “Close all” will close all the video streaming channels. Full Screen takes the image to a full screen display view. Click on the “Remote Play- back”...

  • Page 58: Record Events

    Single channel or QUAD screen can be selected in play- back mode. To playback with single channel mode, click “one Channel Mode” from the playback panel. To play- back with QUAD screen mode, click on the “four Channels figure 89 - Record events 58 | SecurityMan...

  • Page 59: Control Buttons And Functionality

    Click to select the four Channel Mode button to playback Play Speed (Fast) –– use to play the playback 4 all 4 channels at the same time and the following Channel times faster than normal speed. 59 | SecurityMan...

  • Page 60: Backup Recorded File

    Please refer to “Remote Live Surveillance” on Part D. Please see Part D for more detail. page 55 for proper setup and port configuration before attempting to do remote access. • Path – Display the location where the backup files will 60 | SecurityMan...

  • Page 61: Iphone, Ipad And Itouch Application

    Phones that has been tested on and known to be fully compatible with iCamDVR are as shown below in table 3. Other Windows and Symbian series mobile phones may be use but have not been tested. See APPENDIX I and APPENDIX II for iPad software installation and operation and Smart Phone operation system compatibility.

  • Page 62: Iphone, Ipad, And Itouch Application Via Pc

    Store ID and password. to start the installation process. iPhone, iPad, and iTouch application via PC Applies to SuperLiveHD (iPad), SuperCamHD (iPhad), SuperLive, SuperLivePro, SuperCam and SuperCamPro. Step 1 - Download and install iTunes to PC. 62 | SecurityMan...
  • Page 63 Step 4 - Look for the application, click on the icon to see apps tab. To install, place a check mark on Sync apps, the software description or simply click on fRee or PRICe SuperCam_Pro (just downloaded) and finally click the 63 | SecurityMan...

  • Page 64: Using Supercam

    Main User Interface Playback Image Playback Recorded File Image View System Log Server List Sever Pro File Live Setting Live View Software Setting Informa- Device/Phone Info Help Software/FAQ Help tion Log off Logout 64 | SecurityMan...

  • Page 65: Live View

    , and and buttons to move Mask Channel Audio On/Off the PTZ camera up, down, left and right respectively. Tap to stop the PTZ camera from moving (when PTZ is Single Screen QUAD Screen 65 | SecurityMan...

  • Page 66: Image Playback

    NoTe A PTZ supported protocol camera is required to be setup and configured with the local iCamDVR for this function to operate. Image Playback To playback the snapshot images from the phone, select Image from the main user interface and the Image window interface will appear as shown below.

  • Page 67: Video Playback

    Modify to modify server name, address, account and password and then tap on Save to save or Cancel to cancel modification. Add a server list Delete a server list Modify server name 67 | SecurityMan...

  • Page 68: Settings

    Turn oN Shake alarm to enable the phone to vibration in case of video loss or motion trigger. System Log provides information on user’s operation. Who logged into the server, whether they logged in 68 | SecurityMan...

  • Page 69: Information

    To logoff from SuperCam, tap on Logoff from the main Backstage alarm full screen user interface to logout of the system. Color Adjust user log off Table 4 - SuperCam\SuperLive vs. SuperCam_Pro\SuperLive_Pro vs. SuperCam_HD/ SuperLive_HD comparison chart: 69 | SecurityMan...

  • Page 70: Android Supercam Application

    SuperCam application The Android OS must be V1.5 or above is required to be compatible with the iCamDVR’s SuperCam application. To install the application for Android mobile phones, please follow the procedure below: Step 1 - Locate and enter “Market” application on the Android mobile phone as shown in the picture below.
  • Page 71 The system default is set to display camera1. Click on the button to record video to local mobile phone. Click on the button to capture picture or snapshot. Click on the button to enter PTZ mode used for pan/tilt/ zoom for protocol camera. 71 | SecurityMan...
  • Page 72 PTZ configuration user management Device information Device network information Online user condition Log view Backstage alarm full screen Color Adjust user log off Table 5 - android Software Support 72 | SecurityMan...

  • Page 73: Windows Mobile Connection

    Finally, click on “Go” to login to the server. Successful login windows will appear as shown below in figure 120 if the server address, username and password are inputted correctly. figure 118 - Connection Screen. figure 119 - PCam Main Interface Login Screen 73 | SecurityMan...

  • Page 74: Symbian 60 Series Connection

    After selecting “yes” as a confirmation, a system reminder windows will pop up and requires a package to be whether to install the “Scam” or not, click “yes” to proceed. downloaded called “SCam S3 xxx.sis” as illustrated below. 74 | SecurityMan...
  • Page 75 From the Option menu select “System Setting” and then figure 127 - Scam shortcut icon in system menu “Login Setting” to enter server setup login screen. Run “Scam” by clicking on the Scam shortcut icon and the following windows will appear. 75 | SecurityMan...
  • Page 76 PTZ camera position(s) SuperDVR. Notice: There may be different access points in as shown below. different countries or from service providers. figure 130 - establishing Connection figure 132 -optional Control Setting 76 | SecurityMan...

  • Page 77: Blackberry Connection

    To resolve the certificate error, please go to Tools > App. Manager, choose Options > Settings and set Software Installation to All and Online certif. check to Off. Step 2 - Click “SuperCam” to link . figure 134 - Certificate Setting 77 | SecurityMan...
  • Page 78 DVR server connec t network normally or not Modify the option of Browser Configuration. 1) Enter into Menu->Option->Browser Configuration; configure referring to the following figure. Table 5 - TWindows, Symbian, and BlackBerry Software features 78 | SecurityMan...
  • Page 79 2. Main interface If the SuperCam software is used in mobile phone with touch screen, there will be compatible problem. Solution: Enter into Options Menu ->Advance options ->Applications ->SuperCam and click “Disable Compatibility” button. This problem will be solved. 79 | SecurityMan...

  • Page 80: Live View

    Add a server list 【Add】 Mark 1 Current viewing channel Mark 2 Channel status Modify a server list 【Modify】 Delete a server list Switch channels PTZ, click to switch to Fig 2 interface 【Delete】 Snap Full screen 80 | SecurityMan...

  • Page 81: Software Configuration

    Search remote records by event Bidirectional talk Audio P.T.Z. Preset,cruise,speed control Snapshot Snapshot browse Snapshot backup Device information Device network information Online user condition Log view Backstage alarm Color Adjust Table 6 - Windows, Symbian, and BlackBerry Software features 81 | SecurityMan...

  • Page 82: Frequently Asked Questions

    Q: Cannot find iCamDVR “DR3101_3104 Video/audio Card” in the Device Manager? A: A windows system error please restarts the computer. iCamDVR hardware is not plugged in all the way or the communication USB port on the computer is not working properly, change to another available USB2.0 port on the computer.

  • Page 83: Superdvr Q & A

    A: Yes, this option is necessary to setup for automatic system reboot. Server at time will need to reboot for stability, as continuously run server without restarting for days may result in instability, therefore it is necessary to setup automatic reboot for every several day increments. 83 | SecurityMan...
  • Page 84 A: More than one channel can be selected for backup; move the mouse curser in the channels selection area, and click hold down the “Shift” and “Ctrl” key on the keyboard follow by a mouse click from the start of the selected channel to the end of the selected channel for backup. 84 | SecurityMan...

  • Page 85: Network Q

    2000, XP to Vista or 7, as SuperDVR does not support Window 98, 98SE, or ME. Data port or command port may conflict with other network services or may not be properly configured port forwarding. The client workstation may be blocked with firewall software that may prevent video transmission. Poor network establishments. 85 | SecurityMan...

  • Page 86: Other Q & A

    A: Windows media player has been damaged, or decoder has not been installed properly, please reinstall the relative software. Recorded files may be damaged; use SuperaVIfixer program located in the root directory of SuperDVR to browse for and fix the AVI file(s). 86 | SecurityMan...
  • Page 87 Database of recorded log was damaged. SuperDVR might have been installed in a different directory. Q: Why take precautions when changing the date and time on the system hosting iCamDVR? A: The superDVR system provides the retrieving mechanism of video files, which is based on the system time as retrieving reference.
  • Page 88 Q: How to set power options of Microsoft VISTa system? A: To setup power options in Windows Vista go to the “Start Menu” --> choose “Control Panel” --> select “Power options” --> select the “High Performance Change Plan Setting” option. 88 | SecurityMan...

  • Page 89: Troubleshooting

    • 80 GB of free disk space Installation Instruction: 1) Connect the iCamDVR hardware via USB to the computer (do not connect the camera), boot up the computer into windows. 2) Windows will come up with Hardware Wizard, click CANCEL.

  • Page 90: Troubleshooting

    Q: How to setup iCamDVR’s hosting PC for remote access and remote client to remote monitor & playback? A: Make sure the computer hosting the iCamDVR can be used to browse the Internet (prefer DSL or Cable Modem con- nection).

  • Page 91: I: Ipad Software Installation And Operation

    I: iPad Software Installation and operation Step 1 - Open App Store function of ipad. Software Installation 1. Directly install through ipad Step 2 - Enable Search function to search “SuperCam_HD” . 91 | SecurityMan...

  • Page 92: Install Through Pc

    Step 1 - Install iTunes and login. Step 4 - Click “BUY APP” button. Step 2 - Connect Ipad and PC. Step 5 - Enter user name and password to give the payment information, and then the software will be installed automatically. 92 | SecurityMan...
  • Page 93 Step 3 - Enable Search function to search “SuperCam_HD”. Step 5 - Enter Apple ID and Password to give the payment information. Step 4 - Click “$9.99 Buy APP” button. Step 6 - Select “synchronously Apps” and then click “Sync”. 93 | SecurityMan...

  • Page 94: Operation

    1. Login 2. Main Interface figure 1 Icon Function Description Icon Function Description Connect server Add new server address Modify server address Delete server address figure 2 94 | SecurityMan...
  • Page 95 3 figure 5 figure 4 figure 6 95 | SecurityMan...
  • Page 96 Edit pictures. Click it to enter into edition interface (as shown in Figure 8) Double click video window to enter into full screen mode. to delete pictures and make backups. 4. Record Playback 3. Image View Interface figure 7 figure 9 96 | SecurityMan...
  • Page 97 Search record les of the device by time. Select channels to do remote playback. Search record les of the device by event. Click le list to do remote playback. Search record les of the device. Click le list to do remote playback. Note: Only DVR3.0 supports remote configuration. figure 11 97 | SecurityMan...
  • Page 98 5. Configuration Interface figure 13 figure 15 figure 14 figure 16 98 | SecurityMan...
  • Page 99 Check the software and hardware information of the device. 6. Information Interface Check the web information of the device (applicable for DVR 3.0 only). Check the information of online user in connection with this device (applicable for DVR 3.0 only) 99 | SecurityMan...

  • Page 100: Ii: Smart Phone Operation System Compatibility

    II: Smart Phone operation System Compatibility 100 | SecurityMan...

  • Page 101: Iii: Superdvr: Function Tree Diagram

    Left MOTION_ALARM Right Auto Show Exit Down Stop Search & Play Search Data Free Space Bar Time Capture Event Urgent Record Play Control Play/Pause Date/Time Reverse/Pause Minimize Stop Return Previous Frame Zoom Control Zoom Out Next Frame 101 | SecurityMan...
  • Page 102 Schedule Auto Scan Track Manual Motion Detect Record Quality Basic Con g System Son g Caption Mode Schedule Record Frame Rate Interval of AutoDwell Manual Caption Motion Detect Resolution Audio In Deinterlace Security Storage Select Disk 102 | SecurityMan Recycle...
  • Page 103 Buzzer Edit Rights Alarm Con g Disk Shortage Delete User Motion Hold Time Prerecord Hold Time Prerecord Enable Output Device Con g Trigger Buzzer AutoMail AutoMail Con g SMTP Server User Name Email From Password 103 | SecurityMan Send To...

  • Page 104: Webcam

    Select Camera Audio In Tilt Schedule Schedule Record Focus motion Detection Zoom Alarm Output Iris Alarm Buzzer Stop Auto Mail Preset Preset Con g Record Record Quality PTZ Speed Storage Disk Logout Recycle Motion Mask Area 104 | SecurityMan Sensitivity Level...

  • Page 105: Remote Playback

    Single Screen 4 Screen Date & Time Date Start Time Stop Time Play Control Play Speed Speed Up Play Speed Down Pause Original Drag Backup Select Camera Date/Time Search Save Path Backup Exit Event Option Minimize Exit 105 | SecurityMan...
  • Page 106 www.securitymaninc.com...

Table of Contents