Live View - SecurityMan iCamDVR User Manual

Live View

To enter Live View interface, click on Live button from the
main user interface panel and the live view window will
display as illustrated below. The default login to live view
does not contain the single screen view or the
quad screen view; however the channels can be
toggle with the Channel Configure button or simply
tap on the Mark 2 buttons shown below. Active channel(s)
are shown in red numeric where the inactive channel(s) are
shown in white numeric. To login to live view to display
quad screen display, go into Settings, tap on four, and
then back to Live login.
In Live View, a quick transition from quad screen display to
a single screen display is to tap twice on the channel to view
in full screen display and tap twice on the full screen display
to go back to the four channels display screen. Tap on the
mask button to mask desired channel(s) and tap on it again
to undo channel masking. Tap
the image viewed, tap
(make sure the volume speaker on the phone is turn up),
and to record the live video streaming to the phone.
Mark 1 Camera
Channel Configure
Snapshot
Mask Channel
Single Screen
65 | SecurityMan
to take a snapshot of
to turn on/off the audio sound
Mark 2 Channel Status
PTZ Control
Record
Audio On/Off
QUAD Screen
Mark 1 Camera
PTZ Up
PTZ Left
Stop PTZ
Zoom Out/Focus Out/Iris -
Horizontal-Reserve
Preset Position
In Live video streaming view; tap on the
to access the PTZ control as shown below. In PTZ control
mode, tap on , ,
the PTZ camera up, down, left and right respectively. Tap
on to stop the PTZ camera from moving (when PTZ is
Mark 2 Channel Status
PTZ Down
PTZ Right
Zoom In/Focus In/Iris +
Vertical-Reserve
PTZ Rotation Speed
Group Dwell Preset
PTZ button
, and and buttons to move