Control Buttons And Functionality - SecurityMan iCamDVR User Manual

Mode" and all 4 cameras will playback in four split screen,
the channel modes are illustrated below:
one Channel Mode
The default playback mode is Single Channel Mode
which display Camera 1. To change from Camera 1 to
other cameras, click on the "Single Channel Mode"
button and the following channel configuration window
will appear:
figure 92 - one Channel Select
Select any one of the four channels from Channel Config-
uration Windows, please a check mark on "audio" if the
selected camera supports audio recording, and then click
"oK" to accept changes.
Click to select the four Channel Mode button to playback
all 4 channels at the same time and the following Channel
59 | SecurityMan
Configuration Window will appear:
four Channel Mode
Select any combination of the 4 channels or all 4 chan-
nels and select the audio channel that corresponds to the
camera audio setup to playback , then click "OK" to accept
changes and starts playback.

Control Buttons and functionality:

during playback.
times slower than normal speed.
times faster than normal speed.
figure 93 -four Channel Select
Play/Pause –– use to start playback and to pause
Stop –– use to stop the playback.
Play Speed (Slow) –– use to play the playback 6
Play Speed (Fast) –– use to play the playback 4