Windows Vista/7 Driver Software Uninstall - SecurityMan iCamDVR User Manual

After the computer restart, go to device manager to en-
sure the hardware installation for iCamDVR exist under
Sound, Video, and Game Controllers as circled below.
figure 15 - iCamDVR Hardware
To execute and run the SuperDVR software for iCamDVR;
go to "all Program > SuperDVR" or simply double click
on the SuperDVR shortcut location on the desktop as
shown below.
figure 16 - Shortcut of SuperDVR
14 | SecurityMan
NoTe
• iCamDVR require PCs with USB 2.0 Host Controller.
• To disconnect or eject iCamDVR from the computer: Left
click on the Safely Remove Hardware icon on the "Taskbar
-> Safely Remove iCamDVR Video/Audio Card".
• Using iCamDVR system with other USB capture devices
may cause conflict, make sure to close other windows cap-
ture software if SuperDVR cannot execute or show
error messages.
• Avoid using two or more USB and PCI video capture de-
vices on the hosting computer.

Windows Vista/7 Driver Software Uninstall

There are several methods to uninstall the driver software
for iCamDVR. One way is to auto run the CD and pretends
to re-install the driver software. The following windows will
appear to confirm driver software uninstall. Click "oK" to
continue with uninstall.
figure 17 - Confirm file Deletion