Record Setup Panel; Time Stamp; Switch; Manual Record - SecurityMan iCamDVR User Manual

figure 30 - Directory Path
Click on Capture Browse button to browse to a different
path. The default path is "C:\" directory however the system
will automatically create a folder called "C:\Image" to store
all the pictures in.

Record Setup Panel

The "Record Setup Panel" of the Basic Configuration can
be use to setup the necessary parameters when recording
methods are in use. SuperDVR software is equipped with
three types of recording mode and they are as follow:
• Manual Record Mode
• Schedule Record Mode (Timer)
• Motion Detection Record Mode
All four cameras/channels can be independently setup to
record using any of the three types of recording methods
above. Each of the four cameras' recorded files is saved in
separate folders under different name. All record file has
parameters in which is categorized as follow: camera ID,
record date/time and record mode, all are saved together
with the record file.
24 | SecurityMan
figure 31 - Record Setup Panel

Time Stamp

Time Stamp option if selected or checked will creates a
date and time stamp information on the image of the re-
cord file. Each camera can be time stamp independently.

Switch

Switch turns the camera ON or OFF. For any channel(s)
not connected or not in use be sure to deselect those
channel(s) to save space and save system/software re-
sources.
NoTe
if 4 cameras are connected to the iCamDVR be sure to check/
select all 4 camera switch to enable.

Manual Record

Manual record if selected will enable manual recording
for all the selected camera(s). The selected camera(s)