Table of Contents
Advertisement
DVR Installation
Video Output connection to TV or monitor
Please connect the TV or monitor input source to the video-out located on the back of the DVR.
This unit provide an S-Video and 2BNC output connectors. Video output are used primary for
monitoring and toggle between full screen and quad screen display. The call out connector is used
for a 2nd or a son-monitor output to display full screen single channel with auto sequencing mode,
no quad view. The figure below illustrate the connection between the DVR and the monitor output.
S-Video out to TV
Video Input connection (Camera Input)
Please connect camera video cable to the DVR video input port. This unit provide 4 x
BNC video input connectors port. The camera installation procedures are as following:
Connecting the camera video: connect the camera video cable to the DVR's VIDEO-IN.
Connecting the camera power: connect camera's A/C adapter to the camera, and plug the
adaptor into a power outlet. The complete connection illustration with a camera are
shown in the figure below.
Out to TV
Signal line
Camera
Power line
AC/DC adapter
Power outlet
7
Advertisement
Table of Contents
