Record; Record Framerate - SecurityMan LCDDVR4 User Manual

Note: The manufacturer default setting for Brightness, Contrast, Hue and Saturation
is centered at 50%.

RECORD

Select Record from the Setup menu to get to the record setup menu as show
below. The Record setup menu consists of Record FrameRate, Record Qual-
ity and Record Schedule. Press the Menu/ESC on the front panel, remote
control or single right-click on the mouse at any time to exit out of Record menu
to the main Setup menu.

RECORD FRAMERATE

Select the Record FrameRate from the Record Setup menu to access the
record frame rate setting as illustrated in the picture below. The default Record
FrameRate setting is 30fps (frame per second) total; by default channel 1 is set
to 8fps, channel 2 is set to 8fps, 7fps for channel 3, and 7fps for channel 4.
The maximum fps (frame per second) total for all 4 channels can be set to 60fps;
single channel fps can be set up to 30fps. To browse the Record FrameRate
setup menu; press the UP/DOWN or CH1↑/CH2↓ buttons on the front panel,
remote control or use the mouse to hover over the channels. The Record
FrameRate can be setup to the following value:
26