Trouble Shooting Guide - LifeSpan FORCE Owner's Manual

10. TROUBLE SHOOTING GUIDE

Item. Malfunction
Treadmill can't be started
1
Meter can't display
2
Heart rate can't be displayed
3
Incline doesn't work
4
5 Running belt runs faster or
slower than what has been
displayed
6 Running belt slips
7 Running belt is deflected
FORCE
Reasons
The safety key isn't in the
right position
The electrical switch is
placed to "0"
Creepage switch has
malfunctioned
The meter control line and
control panel are
unconnected
The pole of heart rate
sensor is not wet enough
Disturbed by
electromagnetism
The motor wire is not well
connected
Unadjusted
Running belt is not tight
enough
The running belt is
unadjusted.
20
Solution
Put the safety key in the right
position
Turn the electrical switch to "1"
Replace creepage switch
Pull the bolt out and open the
motor cover and reconnect it
Turn on the meter and reconnect
Wet the pole with water or liquor
for hard contact lenses
Stay away from electromagnetism
Open the motor cover and
reconnect it
Readjust it
Please read point 3.3 Adjustment
steps for tightening running belt
for reference
Please read point 3.4 The steps
for adjusting the deflected running
belt for reference