Radio Operations - Jensen JiMS-215i User Manual

TUNING THE RADIO
1.) Press to turn on the unit. The JiMS-215i will enter the iPod mode by default.
2.) To enter the TUNER mode press the FUNCTION Button twice. The FM station
frequency will appear on the Display.
3.) Repeatedly press
To automatically search for stations with strong signals, press and hold either the
4.)
or
Buttons for one second then release.
station signal it finds.
Adjust the sound level by pressing the
5.)
Volume Level reading will be displayed and revert back to the FM mode in 3
seconds.
NOTES:
 Manual tune to select weaker stations that might be bypassed during the automatic
tuning.
 If the automatic tuning does not stop on the exact frequency of the station, for
example, if it stops on 100.9 MHz instead of 100.8 MHz, use the manual tuning
method to "fine tune" to the exact frequency of the desired station.
 If a station is broadcasting in Stereo, the unit will automatically receive the stereo
broadcast and (ST) will be displayed.
Hints for the Best Reception
To obtain the best FM Stereo reception, unwrap and fully extend the FM Antenna and
adjust the position of the wire for best station reception.
STORING THE RADIO STATION PRESETS
The JiMS-215i allows you to store up to
1.) In FM mode, tune to the radio station you want to store in memory using the
or
Buttons as described above.
2.) Press the ENTER/MEMEORY/CLOCK ADJUST Button once, the preset channel

RADIO OPERATIONS

the or Buttons until a station is received.
The frequency reading of the tuned station will be displayed.
20 FM stations for easy recall at any time.
8
The tuner will stop on the first strong
or VOLUME- Buttons.
VOLUME+
The