Radio Operations - Jensen JiMS-211i Owner's Manual

LOCATION OF CONTROLS
Remote Control
1. Infra-red Transmitter
2. POWER
1 3. PRESET /
iPod/iPhone play-pause.
8
4. iPod REP
9 2
5. iPod RAN button ---- iPod / iPhone random playback.
6. VOLUME + / - button ---- Adjusts volume level up or down ;
4
10
Adjusts hour/minute of clock/alarm.
3
7. ALARM ON/OFF
5
11
8. MUTE button ---- Mute the volume.
12
9. SLEEP
10. FUNC button ---- Select FM RADIO, iPod/iPhone, AUX modes.
11. EQ button ---- Select preset EQ effect.
6
13
12. MODE button
14
---- In standby mode, press to adjust clock and alarm setting.
7
15
---- In FM radio mode, press to select FM stereo or mono reception.
13. CH +/- button ---- Select preset radio station.
14. TUN+ / FF and TUN- / FR buttons---
- In iPod/iPhone mode, skip tracks Forward/Backward or perform
highspeed search.
- In Radio mode, tune the radio frequency up/down.
15. SNOOZE/DIMMER
16
16. Battery Compartment
button --- Turns the unit ON/Standby .
button ---- Save radio preset station ;
button ---- iPod / iPhone repeat playback.
button ----Turn the alarm on and off.
button ----Select the time duration of the sleep timer.
button ---- Activate the snooze function ;
turn LCD backlight bright/dim/off.
7

RADIO OPERATIONS

FM Antenna
Unwrap and fully extend the FM Antenna for best FM reception
Radio Tuning
1. Press the POWER button to turn on the unit.
2. Press the FUNCTION button to select FM radio mode.
3.To manually tune to desired station, repeatedly press the
4.To automatically search for stations with strong signals, press and hold the
button until the frequency digits on display begins to scan then release the button. The tuner will stop on
the first strong station signal it finds.
Notes:
MODE button to select FM stereo or mono receiving mode, if necessary.
Radio Preset Stations
Preset Stations
1. Press POWER button to turn on the unit.
2. Press the FUNCTION button to select FM radio mode.
3. Tune to the radio station you want to store in memory by using the
4. Press the PRESET
5. T o select desired preset station number, press
6. T o confirm preset location, press the PRESET
7. Repeat steps 3 to 6 to store other stations if necessary.
Note:
1. There is a 5 second delay when programming, after 5 seconds, the unit will automatically switch
Recalling the preset stations
1. Press the POWER button to turn on the unit.
2. Press the FUNCTION button to switch to the radio mode.
3. Press the CH + or CH - button to select the preset channels
/TUN- or / TUN + button.
/ TUN- or / TUN +
/TUN- or / TUN + button.
CH + / - button.
button.
.
8