Sleep Timer; Auxiliary Input - Jensen JiMS-215i User Manual

Docking digital cd clock radio for ipod and iphone
Table of Contents

Advertisement

time and "Wakeup" mode will be displayed on the Display for a few seconds, after
that the Display will revert to show the current mode. The Alarm Indicator, ALARM,
will appear steadily on the Display.
The sleep timer allows you to turn the unit off after a designated time is reached.
can use the SLEEP Timer to fall asleep to Radio, CD or iPod/iPhone for 120, 90, 60, 30
or 15 minutes intervals.
1.) Turn the JiMS-215i on and then play your favorite CD or dock your iPod/iPhone or
tune to the desired radio station and set the volume to a comfortable level.
2.) Press the SLEEP button. The display will show 120 minutes of playing time and then
return to the current function mode (CD, iPod or FM mode) in a few seconds.
The JiMS-215i will automatically turn off after 120 minutes has elapsed.
3). Press the SLEEP Button repeatedly to select a sleep time. The unit will play for the
selected length of time then automatically turn off.
5.) To turn the unit off before the selected length of time, press and hold the STANDBY
Button at any time.
The JiMS-215i features an auxiliary audio signal input jack for connecting external
devices like MP3 players, CD players and older, non-dockable iPods (except iPod
rd
shuffle 3
gen) and listen to your external source through the speakers of this system.
1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the
cable.
2. Plug one end into the AUX IN Jack on the JiMS-215i and the other end of the cable
into the Line-out Jack or Headphone Jack of your external audio device.
3. Turn on the external audio device.
4. To select auxiliary audio input, first press the STANDBY
215i on and then repeatedly press the FUNCTION Button until "AUX" is displayed.
5. Adjust the volume control on the JiMS-215i. Operate all other functions on the
auxiliary device as usual.
Note:
(1) If you connected the Line Out Jack of your external device then you only need to
adjust the volume control on the JiMS-215i. If you connected the Headphone Jack of
your external device then you may need to adjust both the volume control of your
external device and the volume control of this system to find the most desirable
volume setting.
(2) Press the STANDBY
Don't forget to switch off the power of your external device as well.

SLEEP TIMER

AUXILIARY INPUT

button to turn off
the
17
Button to turn the JiMS-
JiMS-215i when you finish listening.
You
audio

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents